Lexmark Dot Matrix Quick Reference - Page 14
Micro, Setup, Pitch, selections are locked. - printer 2490
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Press this button: When you want to... Micro ↓ Feed the paper downward in: • 1/72-inch increments (2480/2481 models) • 1/90-inch increments (2490/2491 models) If you press and hold Micro ↓, the paper advances in micro movements and then goes into continuous feed. Use Micro ↓ to adjust the Top-Of-Form. Setup Enter Setup mode. You can change the default values and modes for printer operation. Pitch Note: • Repeatedly pressing Pitch rotates through the printer pitch selections. If you continue pressing Pitch through a second pass, the pitch selections are locked. • This setting will be lost when the printer is powered Off and back On. Set the character pitch to: 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, or Proportional Spacing. Note: • On 2490/2491 models you can also select 24 cpi. • Fast Draft supports only 10, 12, and 15 pitch. Note: Some functions may not work when data is being processed and the printer is online (Ready light is On). 14