Lexmark T522 User's Guide

Lexmark T522 - Optra Laser Printer Manual

Get Lexmark T522 - Optra Laser Printer PDF manuals and user guides
UPC - 734646620642
View all Lexmark T522 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark T522 manual content summary:

  • Lexmark T522 | User's Guide - Page 1
    Lexmark T522 User's Reference May 2001 www.lexmark.com
  • Lexmark T522 | User's Guide - Page 2
  • Lexmark T522 | User's Guide - Page 3
    overview 7 Chapter 2: Using the operator panel 8 Understanding the operator panel 8 Using the operator panel buttons 9 Using the operator panel to change printer settings 10 Printing the menu settings page 11 Chapter 3: Using the Print and Hold function 12 Printing and deleting held jobs 12
  • Lexmark T522 | User's Guide - Page 4
    the multipurpose feeder 32 Capacity ...32 Paper dimensions 32 Trouble-free printing 32 Loading paper and transparencies 36 Loading envelopes 15: Tips for avoiding paper jams 47 Chapter 16: Replacing the print cartridge 48 Chapter 17: Replacing the charge roll 49 Chapter 18: Replacing the transfer
  • Lexmark T522 | User's Guide - Page 5
    unresponsive printer 56 Chapter 24: Clearing paper jams 57 Identifying paper jam areas 57 Accessing paper jam areas 59 200 and 201 Paper Jam Remove Cartridge 59 the printer 72 Chapter 25: Solving display problems 74 Chapter 26: Solving printing problems 75 Chapter 27: Solving print quality
  • Lexmark T522 | User's Guide - Page 6
    80 Chapter 29: Solving network printing problems 82 Chapter 30: Resolving other problems and questions 83 Chapter 31: Understanding printer messages 84 Chapter 32: Using printer menus 116 Chapter 33: Finishing Menu 119 Chapter 34: Infrared Menu 125 Chapter 35: Job Menu 130 Chapter 36
  • Lexmark T522 | User's Guide - Page 7
    and scalable fonts 191 Resident fonts 192 Symbol sets ...197 Symbol sets for PCL 6 emulation 197 Downloadable fonts 198 Printing a font sample list 198 Chapter 54: Printer specifications 199 Dimensions ...199 Duty cycle ...199 Notices 200 Edition notice ...201 Trademarks ...201 Licensing
  • Lexmark T522 | User's Guide - Page 8
    vi
  • Lexmark T522 | User's Guide - Page 9
    If you have attached paper handling options to your printer, it may look more like the fully configured model. For information on other possible configurations, refer to the Setup Guide. Standard network model configuration Standard output bin Operator panel Multipurpose feeder Tray 1 (integrated
  • Lexmark T522 | User's Guide - Page 10
    panel menus. You can change most printer settings from your software application or printer driver. Settings you change from the application or printer driver apply only to the job you are preparing to send to the printer. Changes made to printer settings from a software application override changes
  • Lexmark T522 | User's Guide - Page 11
    the first item in the menu. - Opens the menu item and shows the default setting. • Save the displayed menu item as the default setting. The printer shows the Saved message and returns to the menu item. • Clear certain messages from the operator panel. Press Return to return to the previous menu
  • Lexmark T522 | User's Guide - Page 12
    display. - If the selection is a menu, the menu is opened and the first printer setting in the menu appears. - If the selection is a menu item, the default to set new default settings. Press Go if this is the last printer setting to change. User default settings remain in effect until you save new
  • Lexmark T522 | User's Guide - Page 13
    been set by the person managing the printer. You can still use Print and Hold features, clear messages, and select items from the Job Menu when printing a job, but you cannot change other printer settings. You can, however, use your printer driver to override printer defaults and select settings for
  • Lexmark T522 | User's Guide - Page 14
    3 Using the Print and Hold function When sending a job to the printer, you can specify in the driver that you want the printer to hold the job in memory. When you are ready to print the job, you must go to the printer and use the operator panel menus to identify which held job you
  • Lexmark T522 | User's Guide - Page 15
    If the symbol appears on the display, it indicates that the printer had trouble formatting one or more of the held jobs. These formatting problems are most commonly the result of insufficient printer memory or invalid data that might cause the printer to flush the job. When a symbol appears next to
  • Lexmark T522 | User's Guide - Page 16
    . See Printing and deleting held jobs for information. Verify Print If you send a Verify Print job, the printer prints one copy and holds the remaining copies you requested from the driver in printer memory. Use Verify Print to examine the first copy to see if it is satisfactory before printing the
  • Lexmark T522 | User's Guide - Page 17
    choose to print or delete jobs matching the PIN you entered. (See Printing and deleting held jobs for more information.) After printing the job, the printer deletes the confidential job from memory. 15
  • Lexmark T522 | User's Guide - Page 18
    the first line of the display and Cancel Job appears on the second line. Note: Job Menu is the only available menu item when the printer is in the Busy state. 2 Press Select. Canceling Job briefly appears in the display. The
  • Lexmark T522 | User's Guide - Page 19
    second line. 6 Press Menu until you see Exit Config Menu, and then press Select. 7 Activating Menu Changes appears briefly, followed by Performing Self Test. The printer returns to the Ready state. 8 Once Size Sensing is turned off, go into the Paper Size menu for that tray and change the size to
  • Lexmark T522 | User's Guide - Page 20
    keep these guidelines in mind when evaluating new paper stock. For detailed information, refer to the Card Stock & Label Guide located on the Lexmark Web site at www.lexmark.com. Weight The printer can automatically feed paper weights from 60 to 176 g/m2 (16 to 47 lb bond) grain long. Paper lighter
  • Lexmark T522 | User's Guide - Page 21
    its edges. Excessive curl can cause paper feeding problems. Curl usually occurs after the paper passes through the printer, where it is exposed to high temperatures. paper to high temperatures of 225°C (437°F) for MICR (Magnetic Ink Character Recognition) applications, and 205°C (401°F) for non-MICR
  • Lexmark T522 | User's Guide - Page 22
    following guidelines when selecting preprinted forms and letterhead paper for the printer: • Use grain long papers for best results. • Use textured surfaces. Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 205°C (401°F) for
  • Lexmark T522 | User's Guide - Page 23
    printer may require more frequent cleaning and feed reliability may not be as good as that of standard paper. • Weight guidelines for prepunched paper are the same as for non punched paper. Choosing paper Proper paper loading helps prevent paper jams and ensures trouble does not support auto size
  • Lexmark T522 | User's Guide - Page 24
    • To achieve the best possible print quality, use only high-quality envelopes that are designed for use in laser printers. • Use only new, undamaged envelopes. • Load only one size of envelope at a time in the envelope in the same paper tray; mixing print materials can cause feeding problems. 22
  • Lexmark T522 | User's Guide - Page 25
    replace the print cartridge), complete the following steps to maintain printer feeding reliability: 1 Print five sheets of paper. 2 Wait approximately five seconds. 3 Print five more sheets of paper. For more information, refer to the Card Stock & Label Guide, available on the Lexmark Web site at
  • Lexmark T522 | User's Guide - Page 26
    or vendor to determine whether your transparencies are compatible with laser printers that heat transparencies to 212°C (414°F). Use only transparencies refer to the Card Stock & Label Guide, which is available on the Lexmark Web site at www.lexmark.com. Transparencies can be fed automatically from
  • Lexmark T522 | User's Guide - Page 27
    for your printer model, including the paper sizes you can select from the Paper Size menu and supported weights. Note: If you use a paper size not listed, select the next larger size. For information on card stock and labels, refer to the Card Stock & Label Guide available on Lexmark's Web site
  • Lexmark T522 | User's Guide - Page 28
    250-sheet drawer 250 UAT Optional 500-sheet drawer Optional 500 UAT Multipurpose tray Optional 2000-sheet drawer Optional envelope feeder Optional duplex unit Paper size Universal1 Dimensions 139.7 x 210 mm to 215.9 x 355.6 mm      (5.5 x 8.27 in. to 8.5 x 14 in.) 69.85 x 127 mm to
  • Lexmark T522 | User's Guide - Page 29
    Lexmark T522 requires a special label fuser cleaner which prevents duplexing. The label fuser cleaner is included with a special label cartridge g/m2 (100 lb) N/A 216 g/m2 (80 lb) 176 g/m2 (65 lb) N/A Transparencies Laser printer 138 to 146 g/m2 138 to 146 g/m2 N/A (37 to 39 lb bond) (37 to 39
  • Lexmark T522 | User's Guide - Page 30
    140 to 175 g/m2 140 to 175 g/m2 N/A sensitive area (must enter the printer first) Paper base (grain long) 75 to 135 g/m2 (20 to 36 lb preferred for papers over 176 g/m2. 2 Printing label applications on the Lexmark T522 requires a special label fuser cleaner which prevents duplexing. 3 28 lb
  • Lexmark T522 | User's Guide - Page 31
    8 Loading print material This section provides information about loading the various input options. Proper paper loading helps prevent paper jams and ensure trouble-free printing. Before loading paper, you need to know the recommended print side of the paper you're using. This information is usually
  • Lexmark T522 | User's Guide - Page 32
    a paper tray Complete these instructions to load print materials into any of the standard or optional trays. 1 Remove the paper tray. 2 Pull the width guide tab and slide the width guide to the far right side of the tray. 3 Squeeze the length guide lever and slide the length guide to the correct
  • Lexmark T522 | User's Guide - Page 33
    6 Reinstall the tray. Loading letterhead For simplex (single-sided) printing on letterhead, place the printed side face down as shown. For duplex printing on letterhead, place the printed side face up as shown. Note: The Paper Loading menu item lets you print simplex (single-sided) jobs on
  • Lexmark T522 | User's Guide - Page 34
    (9.01 in.) • Length-127 mm (5 in.) to 355.6 mm (14 in.) Trouble-free printing • Load only one size of paper or envelopes at a time in the , use only high-quality print media that is designed for use in laser printers. For more guidelines on paper, see Choosing print material. • To prevent
  • Lexmark T522 | User's Guide - Page 35
    to turn an envelope for printing, and how to load letterhead paper for simplex and duplex printing. See Loading letterhead for detailed instructions on loading documents loaded on letterhead. Simplex letterhead Duplex letterhead Envelope Note: The Paper Loading menu item in the Paper Menu lets
  • Lexmark T522 | User's Guide - Page 36
    the metal bar in the recessed area on the multipurpose feeder far enough to accommodate the paper you will be using. 3 Slide the paper width guide to the far right. 4 Prepare the print material for loading. - Flex paper or fan envelopes back and forth. Do not fold or crease the paper
  • Lexmark T522 | User's Guide - Page 37
    stack of transparencies to prevent jams. Be careful not to scratch or leave fingerprints on the transparencies. 5 Use the stack height limiter as a guide for stack height when loading print materials. Stack height limiter 6 Load one type of print material in the multipurpose feeder. Do not mix types
  • Lexmark T522 | User's Guide - Page 38
    feeder first. WARNING: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or selfstick adhesives. These envelopes may severely damage the printer. b Continue with step 7. Note: If envelopes jam while printing, try reducing the number of envelopes in the multipurpose feeder. 36
  • Lexmark T522 | User's Guide - Page 39
    a duplex unit a Load letterhead paper for single-sided printing with the logo face up. The end of the sheet with the logo should enter the printer first. b Continue with step 7. With a duplex unit a Load letterhead paper for duplex printing with the logo face down. The end of the sheet with the
  • Lexmark T522 | User's Guide - Page 40
    the print material may cause it to buckle. 8 Slide the paper width guide to the left until it lightly touches the stack of print material. Do and type from your software application and select paper size and type from the printer operator panel. a Make sure the Paper Size and Paper Type for the
  • Lexmark T522 | User's Guide - Page 41
    Closing the multipurpose feeder 1 Remove print material from the multipurpose feeder. 2 Push the metal bar straight back to collapse the multipurpose feeder to its short-length position. 3 Close the multipurpose feeder door. 39
  • Lexmark T522 | User's Guide - Page 42
    11 Loading the envelope feeder 1 Gently adjust the envelope support for the size you are loading: - Fully closed (pushed in toward the printer) for short envelopes - Extended to the middle position for medium-length envelopes - Fully open (extended to its full length) for long envelopes WARNING: Do
  • Lexmark T522 | User's Guide - Page 43
    3 Slide the envelope edge guide to the far right. 4 Flex a stack of envelopes back and forth and then straighten the edges on a level surface. Press down the corners to flatten
  • Lexmark T522 | User's Guide - Page 44
    . WARNING: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self- stick adhesives. These envelopes may severely damage the printer. See Choosing envelopes for more information. Note: Do not load more envelopes by forcing them under the envelope feeder weight. This causes
  • Lexmark T522 | User's Guide - Page 45
    the envelope weight to the stack. 8 Select the paper source, size, and type from your software application. 9 Select the paper size and type from printer operator panel: a Make sure the Paper Size for the envelope feeder (Env Feeder Size) is set to the correct envelope size you are loading. (See
  • Lexmark T522 | User's Guide - Page 46
    12 Loading the 2000-sheet drawer For information on loading the 2000-sheet drawer, refer to the 2000-Sheet Drawer User's Guide on the Lexmark T522 Publications CD that came with your printer. 44
  • Lexmark T522 | User's Guide - Page 47
    13 Storing paper Properly storing paper helps ensure trouble-free printing. Use the following guidelines: • For best results, store paper in an environment where the temperature is approximately 21oC (70oF) and the relative humidity
  • Lexmark T522 | User's Guide - Page 48
    the same size print material and both are set to the same paper type. When one tray becomes empty, the printer automatically selects print material from the other tray since the printer sees the trays as linked. If you use different print material in the trays, each source with a different print
  • Lexmark T522 | User's Guide - Page 49
    . If jams occur frequently, make sure you follow these tips to avoid jams: • See Loading print material to load paper properly. Make sure the adjustable guides are positioned correctly. • Do not overload the paper trays. Make sure the paper is under the paper capacity mark on the inside of the paper
  • Lexmark T522 | User's Guide - Page 50
    power cord into a properly grounded electrical outlet and turn the printer on. 7 Follow the instructions on the new print cartridge box to return the used print cartridge to Lexmark for recycling. When you return a used print cartridge, you contribute to a worldwide recycling effort at no cost to
  • Lexmark T522 | User's Guide - Page 51
    roll. Refer to the documentation that comes with the charge roll for detailed installation information. 1 Turn the printer off and unplug the printer power cord. 2 Open the front doors and remove the print cartridge. 3 Remove the old charge roll. 4 Install the new charge roll. 5 Reinstall the print
  • Lexmark T522 | User's Guide - Page 52
    Refer to the documentation that comes with the transfer roll for detailed installation information. 1 Turn the printer off and unplug the printer power cord. 2 Open the front doors and remove the print cartridge. 3 Remove the old transfer roll. 4 Install the new transfer roll. 5 Reinstall the print
  • Lexmark T522 | User's Guide - Page 53
    appears. See Ordering supplies for information on ordering a fuser assembly. CAUTION: The fuser assembly should only be replaced by a Lexmark service technician. Note: For best results, use Lexmark supplies with the printer. If you are in the U.S. or Canada, call 1-800-438-2468 for information about
  • Lexmark T522 | User's Guide - Page 54
    kit, reset the maintenance counter: 1 Press and hold the Select and Return buttons while you turn the printer on. 2 Release the buttons when Performing Self Test appears on the display. The printer performs its power-on sequence, and then Config Menu appears on the first line of the display. 3 Press
  • Lexmark T522 | User's Guide - Page 55
    www.lexmark.com. In other countries, contact the place where you bought your printer. Maintenance kit 80 Scheduled Maintenance appears on the display after 250,000 pages have printed to let you know it is time to replace printer maintenance items. Print cartridges Order a new print cartridge when
  • Lexmark T522 | User's Guide - Page 56
    Order a fuser assembly when 80 Scheduled Maintenance first appears on the display. See the following table for the fuser assembly part number for your specific printer. Printer power supply 115 V 220 V Fuser assembly part number 11K0555 11K0556 54
  • Lexmark T522 | User's Guide - Page 57
    21 Storing supplies Store supplies in their original packaging until you are ready to install them. Do not store supplies in: • Temperatures greater than 43°C (110°F) • An environment with extreme changes in humidity or temperature • Direct sunlight • Dusty places • A car for a long period of time •
  • Lexmark T522 | User's Guide - Page 58
    or breaker. • Other electrical equipment plugged into the outlet is working. • You try turning the printer off, then wait for about 10 seconds, and turn the printer on. This often fixes the problem. • Your printer driver settings are correct. Note: If an error message appears, see Understanding
  • Lexmark T522 | User's Guide - Page 59
    steps in this section. To resolve the paper jam messages, you must clear all paper from the paper path. Press Go to resume printing. The printer prints a new copy of the page that jammed if Jam Recovery is set to On or Auto; however, the Auto setting does not guarantee the
  • Lexmark T522 | User's Guide - Page 60
    jam is located. Jams can occur between two or three trays, on the incline surface of a tray, or between a tray, the duplex unit, and the printer integrated tray. 202 Paper Jam 230 Paper Jam 58
  • Lexmark T522 | User's Guide - Page 61
    the paper is jammed in the area under the print cartridge. This requires removing the print cartridge from the printer. A 201 Paper Jam message indicates the jam is farther inside the printer. 1 Push the release latch and open the printer upper and lower front doors. CAUTION: The rear portion of
  • Lexmark T522 | User's Guide - Page 62
    . 4 Reinstall the print cartridge. 5 Close the upper and lower front doors. 202 Paper Jam Open Rear Door Jams that cause a 202 Paper Jam message require opening the printer rear door. Note: To resolve the message, you must clear all paper from the paper path. For instructions on clearing the jam
  • Lexmark T522 | User's Guide - Page 63
    of the paper is visible, pull the paper straight out. If the paper does not move immediately when you pull, stop pulling. Remove the print cartridge, and then pull the paper out. See Replacing the print
  • Lexmark T522 | User's Guide - Page 64
    While exiting to the output bin Pull the paper straight out. If the paper does not move immediately when you pull, stop pulling. Open the upper front door and pull the paper out. 62
  • Lexmark T522 | User's Guide - Page 65
    step 6. - If only a short piece of paper is visible toward the rear of the printer, do not pull it out; it may be easier to access from inside the printer. See 200 and 201 Paper Jam Remove Cartridge for instructions. - If most of the paper is visible, continue with the following. 3 Pull the paper
  • Lexmark T522 | User's Guide - Page 66
    4 Pull down and out if the paper is in this position. 5 Close the duplex rear door. Make sure it snaps into place. 6 Locate the recessed areas on each side of the duplex front access cover. 7 Slowly pull the duplex front access cover straight out. 64
  • Lexmark T522 | User's Guide - Page 67
    Slide the duplex front access cover back into the duplex unit. Make sure it snaps into place. 12 Slide the integrated tray back into the printer. 65
  • Lexmark T522 | User's Guide - Page 68
    you must clear all paper from the paper path. For instructions on clearing the jam, click the area where the jam integrated tray • Between the envelope feeder and the printer • In the 2000-sheet drawer On the incline Pull the paper tray halfway out of the support unit. 2 Remove the paper based on
  • Lexmark T522 | User's Guide - Page 69
    installed with other optional drawers. 1 Pull the paper tray out of the support unit. If only a short piece of the paper is visible, do not tray back into the support unit. Note: With this type of jam, there may be another jam under the print cartridge. Remove the print cartridge and any jammed
  • Lexmark T522 | User's Guide - Page 70
    Between a tray, the duplex unit, and the integrated tray 1 Pull the paper tray out of the support unit. If only a short piece of the paper is visible, do not pull down to remove the paper. 2 Slowly pull the duplex front access cover straight out from the duplex unit. 68
  • Lexmark T522 | User's Guide - Page 71
    do not see the edge of the paper in the integrated tray: a Push the tray back into the printer. b Open the printer upper and lower front doors. c Remove the print cartridge. See Replacing the print cartridge for more information. You should see the leading edge of the paper now. d Pull the paper out
  • Lexmark T522 | User's Guide - Page 72
    . Align the slides on the print cartridge with the slots on the print cartridge cradle. Use the colored arrows inside the printer for placement. Guide the print cartridge down as it snaps into place. f Close the printer upper and lower front doors. g Slide the paper tray all the way into the
  • Lexmark T522 | User's Guide - Page 73
    message, you must clear all paper from the paper path. For instructions on clearing the jam, click the area where the jam occurred: • At entry into the envelope feeder • Between the envelope feeder and the printer At entry into the envelope feeder Since the envelope feeder feeds envelopes from
  • Lexmark T522 | User's Guide - Page 74
    envelope feeder. 6 Adjust the envelope edge guide. 7 Lower the envelope weight to problem. Between the envelope feeder and the printer 1 Lift the envelope weight. 2 Flip the envelope weight back toward the printer. 3 Remove the stack of envelopes from the envelope feeder. 4 Push the envelope support
  • Lexmark T522 | User's Guide - Page 75
    the envelope out. See Replacing the print cartridge for instructions. 8 Reinstall the envelope feeder. Make sure it snaps into place. 9 Close the printer upper front door. 10 Replace the stack of envelopes in the envelope feeder. 11 Adjust the envelope edge guide. 12 Lower the envelope weight to the
  • Lexmark T522 | User's Guide - Page 76
    is completed, Ready is displayed. If the messages do not appear, turn the printer off and call the Lexmark Customer Support Center. Settings in the software application, the printer driver, or the printer utilities are overriding the settings made from the operator panel. • Change the menu settings
  • Lexmark T522 | User's Guide - Page 77
    or port, but will not print. another USB-capable operating system supported by Lexmark. Print material misfeeds or multiple feeds occur. Make sure the print material you are using meets the specifications for your printer. See Print material specifications for more details. Flex print material
  • Lexmark T522 | User's Guide - Page 78
    Problem Action Print material misfeeds or multiple feeds occur (continued). Make sure the paper width and length guides on the Paper Type setting in the Paper Menu from the printer operator source or on the wrong print panel and in the printer driver. material. Paper does not stack neatly in •
  • Lexmark T522 | User's Guide - Page 79
    the Paper Menu. See Paper Type. • Verify that the print material is within the printer specifications. See Print material specifications for more details. • If the problem continues, call the Lexmark Customer Support Center. Toner appears on the back of the printed page. Toner is on the transfer
  • Lexmark T522 | User's Guide - Page 80
    on the page. • Change the print cartridge. See Replacing the print cartridge for more details. • If the problem continues, change the charge roll. See the print cartridge gently back and forth. Reinstall the same print cartridge. • If you are using preprinted forms, make sure the ink can withstand
  • Lexmark T522 | User's Guide - Page 81
    Problem Characters have jagged or uneven edges. Action • Change the Print Resolution setting in the Quality Menu to 600 dpi or 1200 dpi. • Turn PQET in the Quality Menu to On. • If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the
  • Lexmark T522 | User's Guide - Page 82
    Macintosh computer users: Make sure the printer is set up in Chooser. Printer options are listed below with suggested corrective actions for related problems. If the suggested corrective action does not fix the problem, call your service representative. Options Drawers Duplex unit Envelope feeder
  • Lexmark T522 | User's Guide - Page 83
    are using the correct cable, that it is securely connected, and that the network software is correctly set up. Refer to the drivers CD for more details. Check to make sure printer memory is securely connected to the printer system board. • Make sure the Tri-Port Adapter is securely connected to the
  • Lexmark T522 | User's Guide - Page 84
    28 Solving network printing problems If a job did not print or incorrect characters printed, verify that the Lexmark internal print server or external print server is set up properly and the network cable is connected. Note: Refer to the drivers CD for more details. For Novell users: • Make sure the
  • Lexmark T522 | User's Guide - Page 85
    other problems and questions Problem Action I need to get updated printer drivers or utilities. • Refer to the drivers CD that came with your printer which contains printer drivers and utilities. • Visit the Lexmark Web site, www.lexmark.com, for the most current printer drivers or utilities
  • Lexmark T522 | User's Guide - Page 86
    operator panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This topic provides a list of all printer messages, explains what they mean, and tells you how to clear the messages. Enter PIN: =___ 1 Menu 2 Select 3 Return4
  • Lexmark T522 | User's Guide - Page 87
    Accounting Stat Close Door or Insert Cartridge D Defragmenting Delete All Jobs Go/ Code Invalid Standard Network Code J K L Load Manual Load Tray LocalTalk M Menus Disabled N Hex Reattach Res Reduced Resetting the Printer Resetting Maint Cnt Value Restoring Factory Defaults S
  • Lexmark T522 | User's Guide - Page 88
    X Y Z 0 1 2 2 Paper Jam 3 31 Defective Print Cartridge 32 Unsupported Print Cartridge 34 Short Paper 35 Res Save Off Deficient Memory 37 Insufficient Collation Area 37 Insufficient 7 70-79 8 80 Scheduled Maintenance 81 Engine Code CRC Failure 88 Toner Low 9 900-999 Service 86
  • Lexmark T522 | User's Guide - Page 89
    Wait for the message to clear. Busy What this message means: The printer is busy receiving, processing, or printing data. What you can do: also: Cancel Job Canceling Job What this message means: The printer is processing a request to cancel the current print job. What you can do: Wait for the
  • Lexmark T522 | User's Guide - Page 90
    , remove the specified device, and call for service. Clearing Job Accounting Stat What this message means: The printer is deleting all job statistics stored on the hard disk. What you can do: Wait for the message to clear. Close Door or Insert Cartridge What this message means: The upper front door
  • Lexmark T522 | User's Guide - Page 91
    to clear. No button actions are possible while this message is displayed. WARNING: Do not turn the printer off while this message is displayed. Delete All Jobs Go/Stop? What this message means: The printer is requesting confirmation to delete all held jobs. What you can do: • Press Go to continue
  • Lexmark T522 | User's Guide - Page 92
    settings from the operator panel. See also: Disabling operator panel menus Disk Corrupted. Reformat? What this message means: The printer has attempted a disk recovery process and cannot repair the disk. The disk cannot be used unless it is reformatted. What you can do: • Press Go.
  • Lexmark T522 | User's Guide - Page 93
    current phase. Note: Errors can occur if the printer is powered off while writing to the disk. turn off the printer unless Ready is displayed. Enabling Menus What this message means: The printer is responding to PIN: =___ What this message means: The printer is waiting for you to enter your four-digit
  • Lexmark T522 | User's Guide - Page 94
    print data and discarding the current print job. What you can do: Wait for the message to clear. Formatting Disk What this message means: The printer is formatting the hard disk. Since formatting the disk may take longer in some cases, the second line shows the percent complete. What you can
  • Lexmark T522 | User's Guide - Page 95
    memory to process the job. • To avoid this error in the future: - Delete fonts, macros, and other data stored in printer memory. - Install more printer memory. Note: The messages 37 Insufficient Memory and Held Jobs may be lost alternate on the display. Infrared What this message means: An
  • Lexmark T522 | User's Guide - Page 96
    Guide Invalid Network Code Invalid Standard Network Code What this message means: The code in an internal print server is not valid. The printer cannot receive and process jobs until valid code is programmed into the internal print server. What you can do: Download valid code to the printer
  • Lexmark T522 | User's Guide - Page 97
    the second line of the display in the multipurpose feeder. • Press Select or Go to ignore the manual feed request and print on paper already installed in one of the input sources. If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray
  • Lexmark T522 | User's Guide - Page 98
    to cancel a job that is printing or to select a confidential job or a held job that you want to print. If you need access to the printer menus, contact your network administrator. Network Card Busy What this message means: An internal print server (also called an internal network adapter or INA) is
  • Lexmark T522 | User's Guide - Page 99
    ready to receive jobs. Parallel What this message means: A parallel interface is the active communication link. Performing Self Test What this message means: The printer is running the series of start-up tests it performs after it is turned on. What you can do: Wait for the message to clear.
  • Lexmark T522 | User's Guide - Page 100
    Saver menu item, the Power Saver message replaces the Ready message. What you can do: • Send a job to print. • Press Go to quickly warm the printer to normal operating temperature and display the Ready message. Print Jobs on Disk. Go/Stop? What this message means: Jobs that were spooled to the
  • Lexmark T522 | User's Guide - Page 101
    accounting statistics stored on the hard disk. What you can do: Wait for the message to clear. Printing Menu Settings What this message means: The printer is processing or printing the menu settings page. What you can do: Wait for the message to clear. Prog Engine Code What this message means
  • Lexmark T522 | User's Guide - Page 102
    , in flash memory. What you can do: Wait for the message to clear. WARNING: Do not turn the printer off while this message is displayed. Programming Disk What this message means: The printer is storing resources, such as fonts or macros, on the hard disk. What you can do: Wait for the
  • Lexmark T522 | User's Guide - Page 103
    to receive and process print jobs. What you can do: • Send a job to print. All data sent to the printer is printed in hexadecimal and character representation. Control strings are printed, not executed. • Turn the printer off and then on to exit Hex Trace mode and return to Ready status. • Reset the
  • Lexmark T522 | User's Guide - Page 104
    without using the device. • If a hardware failure occurs, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service. Res Reduced What this message means: The printer is reducing the resolution of a page in the current job from 600
  • Lexmark T522 | User's Guide - Page 105
    to clear. Restoring Factory Defaults What this message means: The printer is restoring the factory default printer settings. When factory default settings are restored: • All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted. • All menu settings return to the
  • Lexmark T522 | User's Guide - Page 106
    clear the message and continue printing. You may notice reduced print quality. • Replace the print cartridge. Tray Empty What this message means: The specified tray is out of paper. What you missing or not fully inserted into the printer. What you can do: Insert the tray completely into the
  • Lexmark T522 | User's Guide - Page 107
    Menu and cancel the current job. 2 Paper Jam What this message means: The printer detects a paper jam. Although the location of the paper jam appears on the second 31 Defective Print Cartridge What this message means: A defective print cartridge is installed. What you can do: Remove the print
  • Lexmark T522 | User's Guide - Page 108
    What this message means: An unsupported print cartridge is installed. What you can do: Remove the print cartridge and install a supported one. See also: Replacing the print cartridge 34 Short Paper What this message means: The printer has determined that the length of the paper in the source
  • Lexmark T522 | User's Guide - Page 109
    . - When Ready is displayed, enable Resource Save from the Setup Menu. • Install additional memory. 37 Insufficient Collation Area What this message means: The printer memory (or hard disk, if installed) does not have the free space necessary to collate the print job. What you can do: • Press Go
  • Lexmark T522 | User's Guide - Page 110
    Jobs may be lost alternate on the display. 38 Memory Full What this message means: The printer is processing data, but the memory used to store pages is full. What you can do: of text or graphics on a page and deleting unnecessary downloaded fonts or macros. - Install additional printer memory. 108
  • Lexmark T522 | User's Guide - Page 111
    the amount of text or graphics on the page and deleting unnecessary downloaded fonts or macros. - Set Page Protect to On in the Setup Menu. - Install additional printer memory. 51 Defective Flash What this message means: The printer detects defective flash memory. What you can do: Press Go to clear
  • Lexmark T522 | User's Guide - Page 112
    on it. • If the error message remains, the flash memory may be defective and require replacing. 54 Serial Option Error What this message means: The printer has detected a serial interface error on a serial port. What you can do: • Make sure the serial link is set up correctly and you are using
  • Lexmark T522 | User's Guide - Page 113
    adapter or ENA). What you can do: • Make sure the cable connecting the ENA and the printer is securely attached. Turn the printer off and then on to reset the printer. • Press Go to clear the message. The printer erases any reference to the ENA and then resets. 54 Parallel Error 54 Parallel Option
  • Lexmark T522 | User's Guide - Page 114
    What this message means: Too many hard disks are installed on the printer. The printer only supports one hard disk at a time. What you can do: Turn off and unplug the printer. Remove the excess hard disks from the printer. Plug in the printer and turn it on. 58 Too Many Flash Options What this
  • Lexmark T522 | User's Guide - Page 115
    do: Remove the specified device. 61 Defective Disk What this message means: The printer detects a defective hard disk. What you can do: • Press Go to is not enough memory on the hard disk to store the data sent to the printer. What you can do: • Press Go to clear the message and continue processing
  • Lexmark T522 | User's Guide - Page 116
    Messages labeled 70-79 identify problems related to the internal print server. What you can do: Refer to the drivers CD for more information. Click View Documentation, and then click MarkNet™ Print Servers. 80 Scheduled Maintenance What this message means: The printer
  • Lexmark T522 | User's Guide - Page 117
    printing. You may notice reduced print quality. • Replace the print cartridge. 900-999 Service What these messages mean: Messages labeled 900-999 relate to printer problems that may require printer service. What you can do: Turn the printer off and check all cable connections. Turn the
  • Lexmark T522 | User's Guide - Page 118
    Symbol Set Orientation Lines per Page A4 Width Auto CR after LF Auto LF after CR Tray Renumber Setup Menu Printer Language Power Saver Resource Save Download Target Print Timeout Auto Continue Wait Timeout Jam Recovery Page Protect Display Language Alarm Control Toner Alarm Job Accounting Serial
  • Lexmark T522 | User's Guide - Page 119
    CR B Baud Blank Pages C Cancel Job Collation Confidential Job Configure MP Copies Custom Types D Data Bits Defragment Flash Display Language Download Target Duplex Duplex Bind E Envelope Enhance F Factory Defaults Finishing Menu Font Name Font Priority Font Source Format Disk Format Flash G H Held
  • Lexmark T522 | User's Guide - Page 120
    Size PostScript Menu Power Saver PQET Print Buffer Print Directory Print Fonts Print Menus Print Net Setup Print PS Error Print Resolution Print Timeout Printer Language Protocol PS SmartSwitch Parallel Menu Serial Menu Network Menu Infrared Menu LocalTalk Menu USB Menu Q Quality Menu R Reset
  • Lexmark T522 | User's Guide - Page 121
    32 Finishing Menu Use the Finishing Menu to define how the printer delivers the printed output. Select a menu item for more details: • Blank Pages • Collation • Copies • Duplex • Duplex Bind • Multipage Border • Multipage Order • Multipage Print • Multipage View •
  • Lexmark T522 | User's Guide - Page 122
    the operator panel.) Values: 1...999 (1*) See also: Collation Duplex Purpose: To set duplexing as the default for all print jobs. (Select Duplex from the printer driver to duplex only specific jobs.) Values: Off* On Prints on one side of the paper. Prints on both sides of the paper. See also
  • Lexmark T522 | User's Guide - Page 123
    Duplex Bind Purpose: To define the way duplexed pages would be bound, and how the printing on the back of the sheet (even-numbered pages) is oriented in relation to the printing on the front (odd-numbered pages). Values: Long Edge* Short Edge Assumes binding along the long end of the page (left
  • Lexmark T522 | User's Guide - Page 124
    Multipage Order Purpose: To determine the positioning of multiple page images when using Multipage Print. The positioning depends on the number of images and whether the images are portrait or landscape in orientation. Values: Horizontal* Vertical Rev Horizontal Rev Vertical See also: Multipage
  • Lexmark T522 | User's Guide - Page 125
    Multipage View Purpose: To determine the orientation of a multipage sheet. Values: Auto* Long Edge Short Edge Lets the printer choose between portrait and landscape orientation. Sets the long edge of the paper as the top of the page (landscape). Sets the short edge of
  • Lexmark T522 | User's Guide - Page 126
    Separator Source Purpose: To specify the paper source that holds separator sheets. Values: Tray (Tray 1*) MP Feeder Env Feeder Selects separator sheets from the specified tray. Selects separator sheets from the multipurpose feeder. (You must also set Configure MP to Cassette.) Inserts
  • Lexmark T522 | User's Guide - Page 127
    calculates the Infrared Buffer size (recommended setting). User specifies the Infrared Buffer size. The maximum size setting depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Infrared
  • Lexmark T522 | User's Guide - Page 128
    4000000 The maximum baud possible for both the printer and the infrared adapter is automatically set during a power on reset. However, if your printer is situated in a bright or highly reflective environment, you may experience intermittent communication problems. If you do, select a lower baud for
  • Lexmark T522 | User's Guide - Page 129
    so it automatically switches to PCL emulation when a print job received through the infrared port requires it, regardless of the default printer language. Values: On* Off Printer examines the data on the infrared interface and selects PCL emulation if the data indicates that is the required
  • Lexmark T522 | User's Guide - Page 130
    by the printer. However, not all host computers can communicate without some transmission delays. User selects a Transmit Delay value between 1 and 15 seconds. If you have trouble printing using the infrared port, selecting a high Transmit Delay value, such as 15, may resolve the problem. 128
  • Lexmark T522 | User's Guide - Page 131
    computer. Values: Auto* 1 Printer sets the Window Size value during a power-on reset to maximize link performance (recommended). User sets the Window Size to one frame (1). If you have trouble printing using the infrared port, changing the Window Size menu item to 1 may resolve the problem. 129
  • Lexmark T522 | User's Guide - Page 132
    34 Job Menu The Job Menu is only available when the printer is busy processing or printing a job, when a printer message is displayed, or when the printer is in Hex Trace mode. Press Menu to open the Job Menu. Select a menu item for more details: • Cancel Job • Confidential Job • Held Jobs • Print
  • Lexmark T522 | User's Guide - Page 133
    , and then press Select. See also: Confidential jobs Held Jobs Purpose: To print Reserve Print, Repeat Print, or Verify Print jobs stored in printer memory. Select the user name associated with your confidential job. Values: Print All Jobs Print A Job Delete All Jobs Delete A Job Copies Prints
  • Lexmark T522 | User's Guide - Page 134
    an ASCII job, such as a print screen command, is printing. Reset Printer Purpose: To reset the printer to the user default value for each menu item, delete all downloaded resources (fonts, macros, and symbol sets) stored in printer memory (RAM), and delete all data in the interface link buffer. Note
  • Lexmark T522 | User's Guide - Page 135
    • PCL SmartSwitch • PS SmartSwitch Note: Values marked by an asterisk are the factory default settings. Job Buffering Purpose: To temporarily store jobs on the printer hard disk before printing. Values: Off* On Auto Does not buffer the print job to the hard disk. Buffers print jobs to the hard
  • Lexmark T522 | User's Guide - Page 136
    automatically calculates LocalTalk Buffer size (recommended). User specifies the LocalTalk Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the LocalTalk Buffer
  • Lexmark T522 | User's Guide - Page 137
    that can register for NPA alerts. Values: 1...10 (2*) Note: Changing this menu item automatically resets the printer. NPA Mode Purpose: To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing
  • Lexmark T522 | User's Guide - Page 138
    automatically switches to PostScript emulation when a print job received through the LocalTalk port requires it, regardless of the default printer language. Values: On* Off Printer examines data on the LocalTalk interface and selects PostScript emulation if the data indicates that is the required
  • Lexmark T522 | User's Guide - Page 139
    SmartSwitch • PS SmartSwitch Note: Values marked by an asterisk are the factory default settings. Job Buffering Purpose: To temporarily store jobs on the printer hard disk before printing. Values: Off* On Auto Does not buffer jobs to the hard disk. Buffers print jobs to the hard disk. Buffers
  • Lexmark T522 | User's Guide - Page 140
    setting). User specifies the Network Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. see the available values. Note: Refer to the documentation on the drivers CD for more information. 138
  • Lexmark T522 | User's Guide - Page 141
    to determine the format and then processes it appropriately. Note: Changing this menu item automatically resets the printer. PCL SmartSwitch Purpose: To configure the printer so it automatically switches to PCL emulation when a print job received through the network port requires it, regardless
  • Lexmark T522 | User's Guide - Page 142
    switches to PostScript emulation when a print job received through the network port requires it, regardless of the default printer language. Values: On* Off Printer examines data on the network interface connection and selects PostScript emulation if the data indicates that is the required
  • Lexmark T522 | User's Guide - Page 143
    marked by an asterisk are the factory default settings. Configure MP Purpose: To determine when the printer selects paper loaded in the multipurpose feeder. Values: Cassette* Manual First Printer treats the multipurpose feeder like any other paper tray. If a print job requests a paper size or
  • Lexmark T522 | User's Guide - Page 144
    Custom Types Purpose: To specify the kind of paper associated with each of the Custom Types available in the Paper Type menu item. Values (for Custom Type , where represents 1 through 6): Paper* Card Stock Transparency Cotton Paper Labels Envelope Note: If a user-defined name is
  • Lexmark T522 | User's Guide - Page 145
    inserts blank pages as necessary to print the job properly on preprinted forms. This setting may slow single-sided printing. Printer assumes preprinted material is loaded for single-sided printing. Duplexed jobs may not print properly. Note: If a user-defined name is available, it is displayed
  • Lexmark T522 | User's Guide - Page 146
    the actual page size from your application software. Paper Source Purpose: To identify the default paper source. Values: Tray (Tray 1*) MP Feeder Env Feeder Manual Paper Manual Env If you loaded the same size and type of paper in two paper sources (and the Paper Size and Paper Type menu items
  • Lexmark T522 | User's Guide - Page 147
    Paper Texture Purpose: To identify the texture of the paper loaded in a specific source and to ensure that characters print clearly. Values: 1 Select a paper type: Plain Texture Card Stock Text Trnsprncy Text Preprint Texture Colored Texture Custom Texture 2 Select a value: Smooth Normal*
  • Lexmark T522 | User's Guide - Page 148
    Custom Type 2 Tray 3-Custom Type 3 Tray 4-Custom Type 4 Tray 5-Custom Type 5 Manual Pap Type-Plain Paper Note: If a user-defined name is available, it is displayed same type and size of paper are automatically linked by the printer, if you have set the Paper Size and the Paper Type to the
  • Lexmark T522 | User's Guide - Page 149
    is truncated to 14 characters. Substitute Size Purpose: To have the printer substitute the specified paper size if the requested size is not loaded. Values: Off Letter/A4 Statement/A5 All Listed* Printer prompts the user to load the requested paper size. Prints A4
  • Lexmark T522 | User's Guide - Page 150
    Universal Setup Purpose: To determine the default size when the Paper Size setting for a tray or feeder is Universal. Values: First select a unit of measure (* denotes a country-specific factory default value): Inches* Millimeters* Then select the values: Portrait Width Portrait Height Feed
  • Lexmark T522 | User's Guide - Page 151
    38 PCL Emul Menu Use the PCL Emul Menu to change printer settings that only affect jobs using the PCL emulation printer language. Select a menu item for more details: • A4 Width • Auto CR after LF • Auto LF after CR • Font Name • Font Source • Lines per Page • Orientation •
  • Lexmark T522 | User's Guide - Page 152
    after a carriage return control command. Values: Off* On Printer does not perform a line feed after a carriage return control command. Printer performs a line feed after a carriage return control command. is R for resident, F for flash, K for disk, and D for download. See also: Font Source 150
  • Lexmark T522 | User's Guide - Page 153
    the set of fonts displayed in the Font Name menu item. Values: Resident* Download Flash Disk All Displays all fonts resident in printer RAM when the printer ships from the factory. Displays all fonts downloaded to printer RAM. Displays all fonts stored in flash memory. Displays all fonts stored on
  • Lexmark T522 | User's Guide - Page 154
    Orientation Purpose: To determine how text and graphics are oriented on the page. Values: Portrait* Landscape Prints text and graphics parallel to the short edge of the paper. Prints text and graphics parallel to the long edge of the paper. Pitch Purpose: To specify the font pitch for scalable
  • Lexmark T522 | User's Guide - Page 155
    , such as math symbols for scientific text. Only the symbol sets supported for the selected font name are displayed. See also: Font Name Tray Renumber Purpose: To configure your printer to work with printer drivers or applications that use different source assignments for the paper trays. First
  • Lexmark T522 | User's Guide - Page 156
    39 Parallel Menu Use the Parallel Menu to change printer settings affecting jobs sent to the printer through a parallel port (either Std Parallel or Parallel Opt ). Select a menu item for more details: • Advanced Status • Honor Init • Job Buffering • NPA Mode • Parallel Buffer •
  • Lexmark T522 | User's Guide - Page 157
    computers activate the INIT signal each time the computer is turned on and off. Values: Off* On Printer does not honor hardware initialization requests from the computer. Printer honors hardware initialization requests from the computer. Job Buffering Purpose: To temporarily store jobs on the
  • Lexmark T522 | User's Guide - Page 158
    size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is USB buffers. Note: Changing the Parallel Buffer menu item automatically resets the printer. See also: Resource Save Parallel Mode 1 Purpose: To control the
  • Lexmark T522 | User's Guide - Page 159
    it automatically switches to PostScript emulation when a print job received through the parallel port requires it, regardless of the default printer language. Values: On* Off Printer examines data on the parallel interface and selects PostScript emulation if the data indicates that is the required
  • Lexmark T522 | User's Guide - Page 160
    Protocol Purpose: To specify the parallel interface protocol. Values: Standard Fastbytes* May resolve some parallel interface problems. Provides compatibility with most existing parallel interface implementations (recommended setting). See also: Technical Reference 158
  • Lexmark T522 | User's Guide - Page 161
    default settings. Font Priority Purpose: To establish the font search order. Values: Resident* Flash/Disk Printer searches printer memory for the requested font before searching flash memory or hard disk. Printer searches the hard disk and flash memory for the requested font before searching
  • Lexmark T522 | User's Guide - Page 162
    41 Quality Menu Use the Quality Menu to change printer settings affecting the quality of printed characters and images. Select a menu item for more details: • PictureGradeTM • PQET • Print Resolution • Toner Darkness Note: Values marked by
  • Lexmark T522 | User's Guide - Page 163
    Print Resolution Purpose: To define the number of dots printed per inch (dpi). The higher the value, the sharper the clarity of printed characters and graphics. Values: 300 dpi 600 dpi* 1200 Image Q 1200 dpi Offers a lower resolution printing option when memory is at a premium. Produces high
  • Lexmark T522 | User's Guide - Page 164
    42 Serial Menu Use the Serial Menu to change printer settings affecting jobs sent to the printer through a serial port (Serial Opt ). Select a menu item for more details: • Baud • Data Bits • Honor DSR • Job Buffering • NPA Mode • Parity • PCL SmartSwitch • PS SmartSwitch •
  • Lexmark T522 | User's Guide - Page 165
    7 8* See also: Technical Reference Honor DSR Purpose: To determine whether the printer uses the Data Set Ready (DSR) signal. DSR is one of the from printing. Job Buffering Purpose: To temporarily store jobs on the printer hard disk before printing. Values: Off* On Auto Does not buffer
  • Lexmark T522 | User's Guide - Page 166
    defined in the Network Printing Alliance (NPA) Protocol. Values: On Off Auto* Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data. Printer does not perform NPA processing. Printer examines the data to determine the format and then processes it appropriately
  • Lexmark T522 | User's Guide - Page 167
    so it automatically switches to PostScript emulation when a print job received through the serial port requires it, regardless of the default printer language. Values: On* Off Printer examines data on the serial interface and selects PostScript emulation if the data indicates that is the required
  • Lexmark T522 | User's Guide - Page 168
    Robust XON Purpose: To determine whether the printer communicates availability to the computer. Values: Off* Printer waits to receive data from the computer. On Printer sends a continuous stream of XONs to the host computer to indicate that the serial port is ready to receive more data. This
  • Lexmark T522 | User's Guide - Page 169
    automatically calculates the Serial Buffer size (recommended setting). User specifies the Serial Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Serial
  • Lexmark T522 | User's Guide - Page 170
    features. Select a menu item for more details: • Alarm Control • Auto Continue • Display Language • Download Target • Jam Recovery • Job Accounting • Page Protect • Power Saver • Print Timeout • Printer Language • Resource Save • Toner Alarm • Wait Timeout Note: Values marked by an asterisk are
  • Lexmark T522 | User's Guide - Page 171
    Purpose: To specify the storage location for downloaded resources. Values: RAM* Flash Disk All downloaded resources are automatically stored in printer memory (RAM). All downloaded resources are automatically stored in flash memory. All downloaded resources are automatically stored on the hard
  • Lexmark T522 | User's Guide - Page 172
    paper size and paper type, the total number of printed pages, and the number of copies requested. Values: Off* On Printer does not store job statistics on disk. Printer stores job statistics for the most recent print jobs. Note: Job Accounting is only displayed when a hard disk is installed and
  • Lexmark T522 | User's Guide - Page 173
    if you want a balance between energy consumption and a shorter warm-up period. Print Timeout Purpose: To specify the amount of time (in seconds) the printer waits before printing the last page of a print job that does not end with a command to print the page. The print timeout counter does not
  • Lexmark T522 | User's Guide - Page 174
    inactive printer language. Printer retains all downloaded resources for all printer languages during language changes and printer resets. If the printer runs cartridge. If an Auto Continue value is selected from the Setup Menu, the printer resumes printing after the specified timeout value. Printer
  • Lexmark T522 | User's Guide - Page 175
    . When this timeout expires, the print job is canceled. Values: Disabled 15...65535 (40*) Disables Wait Timeout. Specifies the amount of time the printer waits for additional data before it cancels the job. Note: Wait Timeout is only available when you use PostScript emulation. This menu item has
  • Lexmark T522 | User's Guide - Page 176
    Use the Utilities Menu to print a variety of listings relating to available printer resources, printer settings, and print jobs. Other menu items let you set up printer hardware and troubleshoot printer problems. Select a menu item for more details: • Defragment Flash • Factory Defaults • Format
  • Lexmark T522 | User's Guide - Page 177
    - All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk Menu, and USB Menu. • All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are deleted. (Resources residing in flash memory or on the hard disk are unaffected.) User-defined settings
  • Lexmark T522 | User's Guide - Page 178
    : To help isolate the source of a print job problem. With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not executed. To exit Hex Trace, turn the printer off or reset the printer from the Job Menu. Job Acct Stat Purpose
  • Lexmark T522 | User's Guide - Page 179
    Print Menus Purpose: To print a listing of the current user default values, the installed options, the amount of installed printer memory, and the status of printer supplies. Print Net Setup Purpose: To print information relating to the internal print server and the network settings defined by
  • Lexmark T522 | User's Guide - Page 180
    • PS SmartSwitch • USB Buffer Note: Values marked by an asterisk are the factory default settings. Job Buffering Purpose: To temporarily store jobs on the printer hard disk before printing. Values: Off* On Auto Does not buffer print jobs to the hard disk. Buffers print jobs to the hard disk
  • Lexmark T522 | User's Guide - Page 181
    data to determine the format and then processes it appropriately. Note: Changing this menu item automatically resets the printer. PCL SmartSwitch Purpose: To configure the printer so it automatically switches to PCL emulation when a print job received through the USB port requires it, regardless
  • Lexmark T522 | User's Guide - Page 182
    automatically calculates the USB Buffer size (recommended setting). User specifies the USB Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the USB Buffer
  • Lexmark T522 | User's Guide - Page 183
    panel menus does not prevent access to the Job Menu or to Print and Hold functionality. 2 Press and hold Select and Return and turn the printer on. 3 Release the buttons when you see Performing Self Test. Config Menu appears on the first line of the display. 4 Press Menu until you see
  • Lexmark T522 | User's Guide - Page 184
    and any options installed above it. • Remove paper options individually; never attempt to remove two or more paper options at once. • Make sure the printer power is off and the power cord and any cables are unplugged before removing any options. For more information, click a topic: • Removing the
  • Lexmark T522 | User's Guide - Page 185
    48 Removing the envelope feeder 1 Remove envelopes from the envelope feeder. 2 Push the envelope support to the closed position. 3 Open the printer upper front door. 183
  • Lexmark T522 | User's Guide - Page 186
    4 Pull the envelope feeder up slightly and straight out of the printer. Set it aside. 5 Close both front doors. 6 Refer to the Setup Guide when you are ready to reattach options. 184
  • Lexmark T522 | User's Guide - Page 187
    49 Removing a paper tray or duplex unit 1 Ask someone to help you lift the printer by the handholds and set it aside. CAUTION: Make sure your fingers are not under the printer when you set it down. 185
  • Lexmark T522 | User's Guide - Page 188
    2 Carefully lift the option straight up until it is completely disconnected from the option below it. Set it aside. 3 Refer to the Setup Guide when you are ready to reattach options. 186
  • Lexmark T522 | User's Guide - Page 189
    If necessary, refer to the Setup Guide for instructions on accessing the printer system board. 1 Locate the memory option you want to remove. WARNING: Electronic components are easily damaged by static electricity. Touch something metal on the printer before you touch the memory option. 2 Push
  • Lexmark T522 | User's Guide - Page 190
    51 Removing an option card If necessary, refer to the Setup Guide for instructions on accessing the printer system board. WARNING: Electronic components are easily damaged by static electricity. Touch something metal on the printer before you touch the card. 1 Locate the option you want to remove. 2
  • Lexmark T522 | User's Guide - Page 191
    design is called a typeface. The typefaces you select add personality to a document. Well-chosen typefaces make a document easier to read. The printer has numerous resident fonts in PCL 6 and PostScript 3 emulations. See Resident fonts for a listing of all resident fonts. Weight and style Typefaces
  • Lexmark T522 | User's Guide - Page 192
    In fixed space fonts, each character has the same width. Pitch is used to specify the size of fixed space fonts. It is a measure of the number of characters that will print in one horizontal inch of type. For example, all 10-pitch fonts print 10 characters per inch (cpi) and all 12-pitch fonts print
  • Lexmark T522 | User's Guide - Page 193
    from a bitmapped font. Bitmapped fonts are available in different type styles and point sizes as downloadable fonts. Contact the place where you bought your printer for more information about downloadable fonts. Scalable fonts (also called outline fonts) are stored as computer programs that define
  • Lexmark T522 | User's Guide - Page 194
    of the most popular typefaces, like Courier and Times New Roman, are available for all printer languages. The following table lists all the fonts resident in your printer. See Printing a font sample list for instructions on how to print samples of the fonts.You can select the resident fonts from
  • Lexmark T522 | User's Guide - Page 195
    Resident scalable fonts (continued) PCL 6 emulation CG Omega Italic CG Omega Bold Italic Garamond Antiqua Garamond Halbfett Garamond Kursiv Garamond Kursiv Halbfett Helvetica Light Helvetica Light Oblique Helvetica Black Helvetica Black Oblique Helvetica Helvetica Italic Helvetica Bold Helvetica
  • Lexmark T522 | User's Guide - Page 196
    Resident scalable fonts (continued) PCL 6 emulation Century Schoolbook Italic Century Schoolbook Bold Century Schoolbook Bold Italic Palatino Roman Palatino Italic Palatino Bold Palatino Bold Italic SymbolPS Symbol Times Roman Times Italic Times Bold Times Bold Italic Times New Roman Times New Roman
  • Lexmark T522 | User's Guide - Page 197
    Resident scalable fonts (continued) PCL 6 emulation PostScript 3 emulation Univers-Light Univers-LightOblique Clarendon Clarendon-Light Clarendon-Bold Helvetica-Condensed Helvetica-Condensed-Bold Helvetica-Condensed-BoldObl Helvetica-Condensed-Oblique StempelGaramond-Bold StempelGaramond-BoldItalic
  • Lexmark T522 | User's Guide - Page 198
    Resident scalable fonts (continued) PCL 6 emulation Line Printer 16 POSTNET Barcode PostScript 3 emulation GillSans GillSans-Italic GillSans-Bold GillSans-BoldItalic GillSans-Condensed GillSans-BoldCondensed GillSans-Light GillSans-LightItalic GillSans-ExtraBold Goudy Goudy-Italic
  • Lexmark T522 | User's Guide - Page 199
    on the keyboard (or more specifically, for each code point). Some applications require different characters at some code points. To support multiple applications and languages, your printer has 83 symbol sets for the resident PCL 6 emulation fonts. Symbol sets for PCL 6 emulation Not all font names
  • Lexmark T522 | User's Guide - Page 200
    lets you manipulate the font files you have downloaded to flash memory or hard disk. See the drivers CD for more information about MarkVision. Printing a font sample list To print samples of all the fonts currently available for your printer: 1 Make sure the printer power is on and the Ready status
  • Lexmark T522 | User's Guide - Page 201
    53 Printer specifications Dimensions Dimension Height with 500-sheet drawer Width Depth Weight (with print cartridge) with 500-sheet drawer Duty cycle Up to 75,000 pages per month. Lexmark T522 379 mm (14.9 in.) 513 mm (20.2 in.) 418 mm (16.5 in.) 513 mm (20.2 in.) 20.4 kg (45 lb) 23.6 kg (52
  • Lexmark T522 | User's Guide - Page 202
    54 Notices • Edition notice • Trademarks • Licensing notice • Safety information • Cautions and warnings • Electronic emission notices • Energy Star • Laser notices 200
  • Lexmark T522 | User's Guide - Page 203
    , Inc. Operation ReSouce is a service mark of Lexmark International, Inc. PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company's designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be
  • Lexmark T522 | User's Guide - Page 204
    Lexmark modified version is similarly provided without warranty. See the warranty disclaimers in the referenced licenses for additional details. To obtain source code files for the Lexmark modified GNU licensed software, launch the drivers CD that shipped with your printer and click Contact Lexmark
  • Lexmark T522 | User's Guide - Page 205
    instructions, to a professional service person. • This product is designed, tested and approved to meet strict global safety standards with the use of specific Lexmark if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
  • Lexmark T522 | User's Guide - Page 206
    Directive has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This product satisfies the Class A and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • Lexmark T522 | User's Guide - Page 207
    receiver is connected. • Consult your point of purchase or service representative for additional suggestions. The manufacturer is not responsible for has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This product satisfies the Class
  • Lexmark T522 | User's Guide - Page 208
    Lexmark International, Inc. has determined that this product meets the Energy Star guidelines for energy efficiency. Laser notices Laser advisory label Laser notice The printer to be hazardous. The printer contains internally a Class IIIb . The laser system and printer are designed so there is
  • Lexmark T522 | User's Guide - Page 209
    Menu) 169 Download Target (Setup Menu) 169 downloaded resources, directory 176 downloaded resources, saving 172 downloaded resources, storage resident 192 scalable 191 symbol sets (PCL 6 emulation) 197 symbol sets supported 153 weight and style 189 Format Disk (Utilities Menu) 175 Format Flash
  • Lexmark T522 | User's Guide - Page 210
    Printer 132 job statistics 170 jobs, canceling 130 jobs, confidential 131 L labels 22 guidelines 22 printer maintenance Jam 105 31 Defective Print Cartridge 105 32 Unsupported Print Cartridge 106 34 Short Paper 106 115 88 Toner Low 115 900-999 Service 115 Activating Menu Changes 87 Busy 87 Cancelling
  • Lexmark T522 | User's Guide - Page 211
    Network Code 94 Load Manual 95 Load Tray 95 103 Resetting the Printer 102 Restoring Cartridge 59 202 Paper Jam Open Rear Door 60 230 Paper Jam Check Duplex 63 24x Paper Jams Check Tray x 66 250 Paper Jam Check MP Feeder 71 260 Paper Jam Check Env Feeder 71 reprinting pages 170 paper length guide
  • Lexmark T522 | User's Guide - Page 212
    Resolution 161 Toner Darkness 161 R recommended paper types 19 replacing charge roll 49 fuser 51 print cartridge 48 transfer roll 50 Reset Printer (Job Menu) 132 resetting maintenance counter 52 resetting printer 132 resident fonts 192 Resource Save (Setup Menu) 172 Robust XON (Serial Menu) 166 RS
  • Lexmark T522 | User's Guide - Page 213
    169 Download Target 169 Jam Recovery 170 Job Accounting 170 Page Protect 170 Power Saver 171 Print Timeout 171 Printer 54 label fuser cleaner 53 maintenance kit 53 ordering 53 print cartridges 53 storing 55 transfer roll 54 Symbol Set (PCL Emul Menu guide 30 Window Size (Infrared Menu) 129 211
  • Lexmark T522 | User's Guide - Page 214
    212
  • Lexmark T522 | User's Guide - Page 215
    Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2001 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 www.lexmark.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
www.lexmark.com
User’s Reference
May 2001
Lexmark T522