Lexmark T522 User's Guide - Page 190
Removing an option card
UPC - 734646620642
View all Lexmark T522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
51 Removing an option card If necessary, refer to the Setup Guide for instructions on accessing the printer system board. WARNING: Electronic components are easily damaged by static electricity. Touch something metal on the printer before you touch the card. 1 Locate the option you want to remove. 2 Loosen and remove the two screws over and under the slot. Gently pull the card out of the connector on the system board. 3 Place the option card in its original packaging. If you did not save the packaging, wrap the card in paper and store it in a box. 4 If you need to install another option on the system board, refer to the Setup Guide. 5 Refer to the Setup Guide for instructions on closing the printer system board cover. 188
188
51
Removing an option card
If necessary, refer to the
Setup Guide
for instructions on accessing the printer system board.
W
ARNING
:
Electronic components are easily damaged by static electricity. Touch something
metal on the printer before you touch the card.
1
Locate the option you want to remove.
2
Loosen and remove the two screws over and under the slot. Gently pull the card out of the
connector on the system board.
3
Place the option card in its original packaging. If you did not save the packaging, wrap the card
in paper and store it in a box.
4
If you need to install another option on the system board, refer to the
Setup Guide
.
5
Refer to the
Setup Guide
for instructions on closing the printer system board cover.