Lexmark X658 Clearing Jams Guide - Page 2

paper jam, 239 paper jams - toner

Page 2 highlights

3 Push the release latch, and then open the front cover. 202 paper jam Touch Status/Supplies to identify the location of the jam. If the paper is exiting the printer, then pull the paper out, and then touch Continue. If the paper is not exiting the printer: 1 Pull down the top rear door. 4 Lift and pull the print cartridge out of the printer. Warning-Potential Damage: Do not touch the photoconductor drum on the underside of the cartridge. Use the cartridge handle whenever you are holding the cartridge. 5 Place the print cartridge aside. Warning-Potential Damage: Do not leave the cartridge exposed to light for extended periods. Warning-Potential Damage: The jammed paper may be covered with unfused toner which can stain garments and skin. 6 Remove the jammed paper. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. Note: If the paper is not easy to remove, then open the rear door and remove the paper from there. 7 Align and reinstall the print cartridge. 8 Close the front cover. 9 Close the multipurpose feeder door. 10 Touch Continue. 2 2 Remove the jammed paper. 3 Close the top rear door. 4 Touch Continue. 230-239 paper jams 1 Touch Status/Supplies to identify the location of the jam. 2 Pull the standard tray out.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

3
Push the release latch, and then open the front cover.
4
Lift and pull the print cartridge out of the printer.
Warning—Potential Damage:
Do not touch the
photoconductor drum on the underside of the cartridge. Use
the cartridge handle whenever you are holding the cartridge.
5
Place the print cartridge aside.
Warning—Potential Damage:
Do not leave the cartridge
exposed to light for extended periods.
Warning—Potential Damage:
The jammed paper may be
covered with unfused toner which can stain garments and
skin.
6
Remove the jammed paper.
CAUTION—HOT SURFACE:
The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Note:
If the paper is not easy to remove, then open the rear
door and remove the paper from there.
7
Align and reinstall the print cartridge.
8
Close the front cover.
9
Close the multipurpose feeder door.
10
Touch
Continue
.
202 paper jam
Touch
Status/Supplies
to identify the location of the jam. If the
paper is exiting the printer, then pull the paper out, and then touch
Continue
.
If the paper is not exiting the printer:
1
Pull down the top rear door.
2
Remove the jammed paper.
3
Close the top rear door.
4
Touch
Continue
.
230–239 paper jams
1
Touch
Status/Supplies
to identify the location of the jam.
2
Pull the standard tray out.
2