Lexmark Z12 Color Jetprinter User's Guide for Windows 95 and Windows 98 (1.5 M - Page 6
Step 2: Load the print media, See for instructions on loading banner paper.
View all Lexmark Z12 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step 2: Load the print media Note: See page 3 for instructions on loading banner paper. 1 Place the media against the right side of the sheet feeder. Follow these guidelines when loading print media: Load up to: Make sure: 100 sheets of plain paper • The print side is facing you. 10 envelopes • The print side is facing you. • The envelopes are loaded vertically against the right side of the sheet feeder. • The stamp location is in the upper left corner. 10 greeting cards, index cards, or postcards • The print side is facing you. • The cards are loaded vertically against the right side of the sheet feeder. 25 transparencies • The rough sides of the transparencies are facing you (smooth side down). 25 iron-on transfers • You follow the instructions on the packaging to load the iron-on transfers. 20 sheets of banner paper • You follow the directions for printing banners on page 3. 100 sheets of custom size • The print side is facing you. paper • Your paper size fits within these dimensions: - Width: 76 mm to 216 mm (3.0 in. to 8.5 in.) - Length: 127 mm to 432 mm (5.0 in. to 17.0 in.) 2 Squeeze the tab on the paper guide and slide the paper guide to the left edge of the media. Paper alignment marks Sheet feeder Paper guide • 2 • • • Chapter 1 •