Lexmark Z43 Color Jetprinter User's Guide for Windows NT 4.0 and Windows 2000 - Page 38

If the print quality of both sets of lines is not satisfactory after run, ning the test three times

Get Lexmark Z43 Color Jetprinter PDF manuals and user guides View all Lexmark Z43 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Steps to basic printing Beyond the basics Maintaining your printer Troubleshooting Appendix Index Maintaining your printer 5 Compare the diagonal lines above the printed bars to the diagonal lines below the printed bars. Look for a break in the diagonal lines. A broken line indicates clogged nozzles. If the bottom line still has breaks, run the test two more times. • If the print quality is satisfactory after running the test three times, the print nozzles are clean. You do not need to complete the remaining steps. • If the print quality of both sets of lines is not satisfactory after running the test three times, go to step 6. 6 Remove and reinstall the print cartridge. For help, see page 29. 7 Repeat the nozzle test. 8 If the lines are still broken, continue with the next section, Wiping print nozzles and contacts. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
38
Maintaining your printer
Beyond the basics
Maintaining your printer
Troubleshooting
Appendix
Index
Steps to basic printing
5
Compare the diagonal lines above the printed bars to the
diagonal lines below the printed bars. Look for a break in the
diagonal lines. A broken line indicates clogged nozzles.
If the bottom line still has breaks, run the test two more times.
•
If the print quality is satisfactory after running the test three
times, the print nozzles are clean. You do not need to complete
the remaining steps.
•
If the print quality of both sets of lines is not satisfactory after run-
ning the test three times,
go to step 6
.
6
Remove and reinstall the print cartridge. For help, see
page 29
.
7
Repeat the nozzle test.
8
If the lines are still broken, continue with the next section,
Wiping
print nozzles and contacts
.