LiftMaster CSW24V CSW24V Installation Manual - Page 22
Dual Gate Wire Type Stranded Copper Wire, 18awg - 200-1000 Feet
View all LiftMaster CSW24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
WIRING DUAL GATES ONLY DUAL GATES ONLY There are two options for dual gate communication: wired or wireless. Follow the directions according to your application. Do not use wired and wireless communication simultaneously. Wired dual gate applications will have a longer battery standby time than wireless applications. WIRED DUAL GATES Before digging, contact local underground utility locating companies. Use PVC conduit to prevent damage to cables. 1 Trench across driveway to bury the extension cable. 2 Connect the wires from the extension cable to the Comm Link terminals on the primary gate operator control board. 3 Route the extension cable to the secondary gate operator's control board. DUAL GATE WIRE TYPE (STRANDED COPPER WIRE) 22AWG up to 200 feet (61 m) 18AWG - 200-1000 feet (61-305 m) Wire must be rated at 30 Volt minimum 4 Connect the wires from the extension cable to the Comm Link terminals on the secondary control board (Comm Link A to Comm Link A and Comm Link B to Comm Link B). COMM LINK BA OM N.C. Comm Link Data A Comm Link Data B 2 ! ProInpseirdtye 1 PrOopuetsritdye ! COMM LINK BA OM N.C. Comm Link Data A Comm Link Data B 4 3 20