LiftMaster Dial Code Dial Code LC Series Manual - Page 28

STRIKE TIME Strike Time sets the amount of time your gate or door relay will be held open. In the Program Selection Screen (fig a.), Press the S key. The strike time can be set for both gates and doors (fig b.) Press the D key to set the Door Strike Time. Type in a time from 1 to 99 seconds (fig c.). Press the key to enter your selection. SELECT PROG MODE: (S)Strike Time (fig a.) Door Strike Time > D Gate Strike Time > G (fig b.) Press the G key to set the Gate Strike Time. Type in a time from 1 to 12 seconds (fig d.). Press the key to enter your selection. DOOR STRIKE TIME: [01-99] 10 Seconds GATE STRIKE TIME: [01-12] 05 Seconds (fig c.) (fig d.) DOOR NAME/LOCATION GATE NAME/LOCATION South Entry Door North Side Gate (fig e.) (fig f.) For either the Gate or Door Strike TIme, you may now type in a name and location (up to 13 characters) to which you want the programmed strike time applied. (fig e.) and (fig f.) Press the key to complete the transaction. TALK TIME You can set the amount of time to talk on the Entry Phone at 20, 40, or 80 seconds. SELECT PROG MODE: (T)Talk Time TALKTIME IS 20 SEC (B)40 Sec (C)80 Sec (fig g.) (fig h.) In the Program Selection Screen (fig g.), Press the T key. Choose the desired Talk Time, press A for 20 seconds, B for 40 seconds, or C for 80 seconds (fig h.). Press the key to confirm your entry. PAGE 27