LiftMaster LA500UL Installation Manual - Page 12
Step 3 Install the Control Box, Standard Control Box
View all LiftMaster LA500UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
INSTALLATION Step 3 Install the Control Box Standard Control Box The control box MUST be mounted within 5 feet (1.52 m) of the gate operator. Mount the control box as high as possible for best radio reception. Make sure the control box is level. NOTE: The expansion board DOES NOT need to be removed for a wall or column mount installation. 1. Remove the screws and open the control box. 2. Disconnect the "Main Board" connector from the expansion board. 3. Remove the expansion board by removing the screws. 4. Select the mounting holes (according to your application) and remove the knockouts using a screwdriver and hammer. 5. Secure the control box to mounting surface. A. Wall or Column: Use the provided screws (4). B. Post: Use U-bolts and rubber washers (not provided) to ensure a watertight seal. Make sure the U-bolts do not protrude more than 3/4 inch from the control box because this can short the control board. 6. Reinstall the expansion board and connect the "Main Board" connector to the expansion board. 12