LiftMaster LA500UL Installation Manual - Page 55

ACCESSORIES Miscellaneous Remote antenna extension kit The remote antenna extension kit allows the antenna to be remotely installed. Model 86LM Wireless commercial keypad Durable wireless keypad with blue LED backlight metal keypad, zinc-alloy metal front cover and 5 year 9V lithium battery. Security+ 2.0® compatible. Model KPW250 Commercial access control receiver Access control receiver for up to 1,000 devices (any combination of remote controls and wireless keyless entries). Model STAR1000 LiftMaster Cloud™ connected access protocol - high capacity Model CAPXL Plug-in loop detector Low power. Conveniently plugs into existing control board. Model LOOPDETLM Warning sign Model 40-39235 Loop Detector Low power loop detectors mounted and wired separately inside control box. LiftMaster low power accessory. Model LD7LP PUSH-TO-OPEN BRACKET Used to allow the gate operator to push the gate open. Model 50-19503 Vehicle sensing probe The vehicle sensing probe is buried in the ground and can detect a car as it approaches and will then open the gate. Model CP3 Magnetic gate lock Outdoor magnetic lock, transformer, junction box, mounting plate and hardware. Not for use with Solar Applications. Must be powered separately. Model MG1300 Batteries Gate access system batteries replace or upgrade the gate operator batteries. Two identical 12 Vdc batteries are required for each gate operator. Do not mix 7AH and 33AH batteries within a gate operator. 7AH batteries Standard 7 AMP-Hour Battery, 12 Vdc, to replace original batteries provided with operator. Reuse existing harnesses. Model 29-NP712 Transformer Model APOW3 33AH batteries Upgrade 33 AMP-Hour Battery, 12 Vdc. Ideal for solar applications and extended battery backup. For use with Large Metal Control Box ONLY. Model A12330SGLPK Battery tray Required for 33AH applications. Model K10-36183 Universal solar wire harness kit For 7AH and 33AH applications. Model K94-37236 55