Linksys PCMPC200 User Guide - Page 13

Linksys Instant EtherFast® Series 12. Optional: Click on the Access Control tab. Make sure that Shared-level access control is selected. If the setting is on User-Level access control and you can't change it, skip to Troubleshooting problem 5 on page 35. 13. Click on the OK button. Your system may or may not ask you for your Windows 95 CD-ROM or the location of the 95 installation files. Direct Windows to the appropriate location, (e.g., "D:\win95", "C:\windows\options\cabs"). 14. Once Windows is done copying the necessary files, the System Settings Change window appears. Remove all disks from your computer and click on Yes to restart your PC. EtherFast® 10/100 CardBus PC Cards 15. Once the computer has restarted and Windows is up, a Logon window will appear. Make up a username and password and click OK. Do not click the Cancel of Esc button, or you won't be able to log onto the network. If the a logon does not appear or if it does not allow you to log on, refer to Troubleshooting problem 3 on page 34. 16. Once you are at the Windows 95 desktop, double-click on the Network Neighborhood icon. You should see an icon for the Entire Network, and/or the names of the other PCs on the network. In order to see your other computers in Network Neighborhood, you need to enable File and Printer Sharing. To enable File and Printer Sharing refer to page 37 of this User Guide. If you don't see anything at all, press the F5 key on your keyboard a few times to refresh the screen. If you only see your computer in Network Neighborhood, skip to Troubleshooting problem 6 on page 35. If you only see computers that are running the same operating system as you and you don't see any others, go to Troubleshooting problem 10 on page 36. If you see all computers on the network except yours, and the other PCs can't see your computer, see Troubleshooting problem 7 in on page 35. If you don't see this window, simply close down Windows 95 and restart your computer by clicking on the Start button, then Shut Down, select Restart the Computer, then click Yes. The installation is complete. Remember to remove the Driver Disk from the floppy drive. Look at the EtherFast Card's LEDs. If your cabling is properly attached and the network is detected, the green Link light will be on, and the Activity (ACT) light will be flickering or solid. 20 21