Linksys PCMPC200 User Guide - Page 8

Linksys Instant EtherFast® Series Network Driver Setup Follow these instructions carefully. You can view or print the setup directions from your favorite word processor. For the operating systems not covered in this user guide, insert the program disk into your PC. The supported OSes not covered in this User Guide have subdirectories that contain "read me" instructions. These DOS-based OSes are listed below. A:\NETWARE NetWare Client (DOS ODI) NetWare Lite Personal NetWare Sun PCNFS (with ODI drivers) A:\PKTDRV Packet Driver A:\WFW311 Windows for Workgroups 3.11 A:\NDIS2 NDIS support Lantastic Sun PCNFS (with NDIS drivers) Microsoft LAN Manager EtherFast® 10/100 CardBus PC Cards Windows 98 Installation and Setup Overview The instructions provided in this section will help you to install the EtherFast 10/100 CardBus PC Card on Microsoft Windows 98. After installing the EtherFast 10/100 CardBus PC Card hardware in your computer, follow these instructions to install the EtherFast 10/100 CardBus PC Card's Windows 98 network driver from the card's driver disk. Please keep in mind that the installation procedure for the network driver will vary slightly depending on the version of Windows 98 you are using and your current system configuration. The following setup instructions are for setting up your EtherFast 10/100 CardBus PC Card on the Final Release of Microsoft Windows 98 only. Note: Screen shots used in this Installation and Setup section are from installation of the standard EtherFast 10/100 CardBus PC Card (PCMPC200 v2). If you are installing the EtherFast 10/100 Integrated CardBus PC Card (PCM200 v2), the installation process will be unchanged, however, the product name will be different. Installing the CardBus PC Card's Driver To install the network driver, Start up your computer. 1. Windows 98 will automatically detect the presence of the EtherFast 10/100 CardBus PC Card in your computer. The card may get recognized as a PCI Ethernet controller or a PCI Fast Ethernet DEC 21143-based adapter instead of a Linksys EtherFast 10/100 CardBus PC Card, which is okay. You can proceed to the next step. If Windows 98 goes directly to the windows desktop and does not display the New Hardware Found window, refer to Troubleshooting problem 1on page 34. 10 11