Lowrance Auto-Standby button Metal Addendum software release v20.2 for Zeus2 G - Page 15

• Range markers • Compass • Heading line • Active route Radar panel symbology can be collectively turned on/off from the Symbology option in the More sub-menu if they are selected to show in the radar settings dialog. Bearings Used for selecting whether the bearing should be measured in relation to True/Magnetic North (°T/°M), or relative to own vessel (°R). Ú Note: True bearing can only be selected when a compass is available. Data bar Turns on/off the radar data bar. Refer to the radar panel illustration. By default, the data shows targets arranged with the most dangerous targets on top. You can select to show radar targets on top and before any AIS targets, even if the AIS targets are considered more dangerous. Vessels and tracked targets This dialog contains settings for both AIS and radar targets. AIS specific settings are only available if you have a capable AIS device connected to your system. Use this option to specify: • Dangerous targets - Time to closest point of approach - specify the time of approach in which a vessel is to be considered dangerous. - Closest point of approach - specify the closest point of approach in which a vessel is to be considered dangerous. This setting determines the size of the safe ring if safe ring is enabled, refer to "Safe ring" on page 16. • Targets of interest - targets further away than the following distance will be hidden: - Range of interest - specify to show targets in all ranges (based on radar range) or targets within a specific distance of own vessel. • Filtering - define which and how many AIS targets will be shown. If the amount of targets exceeds the set number, only the most interesting targets will be shown. For radars that support tracking targets, the following target filter settings will also apply to tracked targets. Filter options are: - Show - specify to show all targets, dangerous targets, or no targets. - Max AIS targets - specify to show all AIS targets or specify a maximum number of AIS targets to be shown. - Hide slower than - specify to hide targets slower than a specific speed or all targets regardless of speed. - Hide lost targets after - specify to hide targets that are lost after a certain amount of time or do not hide any lost targets. ADDENDUM | Zeus Series 15