Lowrance Auto-Standby button Metal Addendum software release v20.2 for Zeus2 G - Page 8
Radar target symbols
View all Lowrance Auto-Standby button Metal manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
D CA B C B Shape: Sector Shape: Circle Alarm settings An alarm is activated when a radar target breaches the guard zone limits. You can select if the alarm is activated when the target enters or exits the zone. Sensitivity The guard zone sensitivity can be adjusted to eliminate alarms for small targets. Radar target symbols The system uses the target symbols shown below. Radar target, not moving. Radar moving target with trail when target history is enabled. Moving radar target with no course extension (short line indicating the direction where the target moves). Moving radar target with course extension. Dangerous radar moving target (yellow), with trail when target history is enabled. The yellow color is shown when the radar palette is black/red or black/green. Dangerous radar moving target (purple), with trail when the target history is enabled. The purple color is shown when the radar palette is white/red. Dangerous radar dangerous moving target (red), with trail when target history is enabled. The red color is shown when the radar palette is black/yellow. Associated target. When the radar and the AIS signal acquire the same target, the system will display the target with one symbol. This reduces the number of AIS symbols and radar targets on the PPI. The association function also compensates for a possible failure in one of the two targets, e.g., if the radar target is positioned behind an island, the system keeps tracking and visualizing the AIS target. Ú Note: The radar target continues to be analyzed by the system when the target association is active. Selected radar target. Lost radar target. 8 ADDENDUM | Zeus Series