Lowrance Auto-Standby button Metal Addendum software release v20.2 for Zeus2 G - Page 19

Vessel alarms You can define several alarms to alert you if a target shows up within predefined range limits, or if a previously identified target is lost. Note: For the system to display dangerous target alert messages when dangerous targets are detected, the Dangerous vessel option must be enabled. Dangerous targets AIS targets are defined as dangerous targets in the Vessels and tracked targets dialog (TCPA/CPA settings), refer to "Vessels and tracked targets" on page 21. Dangerous target alerts When a vessel meets the dangerous target criteria set in the Vessels and tracked targets dialog (TCPA/CPA settings) and if the Dangerous target alert option in the Alarms settings dialog is enabled, a dangerous target alert message dialog is displayed. The following options are available in the message dialog: • Disable, closes the message dialog and cancels the dangerous target alert for all vessels. You can re-enable the dangerous vessel alert in the Vessels section of the Alarms settings dialog. Ú Note: When Disable is selected, the Dangerous target alert option in the Alarms settings dialog is turned off. When the Dangerous target alert option is turned off (disabled), dangerous target alert messages are not generated for either radar or AIS dangerous targets. • Ignore, closes the message dialog and disables the alert for that vessel. The alert for that vessel will reappear if the status of that vessel changes, i.e. that vessel becomes safe and then dangerous again. • View, closes the message dialog and opens the chart panel with the dangerous vessel's pop-up activated. You can select the vessel's pop-up in the chart panel to see the AIS vessel details. AIS target symbols and icons Symbol Description AIS target, stationary or moving if no extension lines enabled AIS dangerous target (yellow). The yellow color is shown when the radar palette is black/red or black/green. AIS dangerous target (purple). The purple color is shown when the radar palette is white/red. AIS dangerous target (red). The red color is shown when the radar palette is black/yellow. ADDENDUM | Zeus Series 19