Lowrance Broadband 4G Radar Installation Guide - Page 15
Mounting the radar interface box
View all Lowrance Broadband 4G Radar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Shortening the cable It is not recommended to shorten the cable, but if it is unavoidable, use the pin-out below to re-terminate the cable with a new RJ45 plug. RJ45 Connector pinout P8 P1 Pin Color 1 White/Orange 2 Orange 3 White/Green 4 Blue Required to complete 5 White/Blue 6 Green 7 White/Brown 8 Brown RJ45 Connector RJ45 Crimping tool Mounting the radar interface box • Install the radar interface box (where applicable) in a dry location away from spray, rain, drips and condensation • The radar interface box must be located where it can be easily connected to the ship's power source, the scanner interconnection cable, SimNet/NMEA2000 and the display or display network • Allow enough room for cables to form a drip loop • Preferably mount the radar interface box on a vertical surface with cables exiting downwards • Insert connectors. See"Connect the interconnection cable to radar interface box"on page 12 • Secure to the surface using the four mounting points and supplied 8G x 5/8 pozi s/s fasters Installation | Broadband 3G/4G™ Radar Installation Guide | 13