Lowrance Broadband 4G Radar Installation Guide - Page 18

Zeus B&G Zeus Simrad NSO, NSE and NSS (SimNet network) 1 B&G Zeus SIMRAD NSO, NSE or NSS MFD 2 3 4 SimNet Ethernet SimNet Ethernet NSO +_ 5 6 FUSE 8 97 10 FUSE 7 Parts required for FUSE Chart overlay / MARPA 12 SimNet Network SimNet Ethernet NSE NSS NMEA2000 Ethernet SimNet Ethernet NMEA2000 cables SimNet cables Ethernet cable Ethernet cables if using NEP-2 11 Alternative: NMEA0183 heading White RX+ TX+ Brown RX- TX- AT10HD NMEA083 to SimNet Converter Heading Only Cut off 12 Pin plug to expose bare wires NMEA0183 10 Hz Heading (e.g Gyro, Sat Compass) 1. B&G Zeus or Simrad NSO / NSE / NSS 2. Broadband 3G™ or 4G™ Radar 3. Interconnection cable: Ships with a 20 m (65 ft). Optional 10 m (33 ft) and 30 m (98 ft) 4. RI10 Radar interface box 5. Ethernet cable (1.8 m (6 ft)). The RI10 can be connected directly to the NETWORK port of the display/processor box, or via a Network Expansion Port (7). For cable options see "Ethernet cables" on page 28 6. Ethernet cables required to connect 3G™ / 4G™ via a NEP-2 (6) 7. NEP-2 Ethernet switch The following Parts required for MARPA and / or chart overlay: 8. For B&G Zeus, Simrad NSE, NSO: SimNet cable. (Not supplied) For SimRad NSS: SimNet to Micro-C cable (Not supplied) see "SimNet - NMEA2000 adapter cables" on page 28 9. SimNet drop cable. Allows display to receive heading information for chart overlay 10. RC42 Heading Sensor (22090195) 11. AT10HD. For installations with a NMEA0183 heading sensor 12. SimNet Network 16 | Connect the Broadband radar to your display | Broadband 3G/4G™ Radar Installation Guide