Lowrance Broadband 4G Radar Installation Guide - Page 16

4 Connect the Broadband radar to your display Lowrance HDS USA (no MARPA) 3 1 NEP-2 (Optional) 2 2 4 FUSE FUSE +_ 1. Lowrance HDS 2. Ethernet adapter cable. 5 pin yellow male to RJ45 female 1.8 ft (6ft). Included in 3G™ kit 000- 10418-001 (Lowrance USA only). Can connect directly to the HDS, or via a NEP-2 Ethernet switch, or using a free Ethernet port on a LSS-1 Structure Scan module (if applicable)  Note: Make sure this connection is made in a dry environment and is secured properly 3. Broadband 3G™ Radar 4. Interconnection cable - ships with a 10 m (33 ft): Optional 20 m (65 ft) and 30 m (98 ft) available  Note: To add MARPA and / or chart overlay, you need to add an RI10 Interface Box and Heading Sensor (see next page)  Note: Broadband 4G™ radar may also be connected in this manner, but offers no advantage as they are all shipped with an RI10 interface box, which allows connection of a heading source to the radar 14 | Connect the Broadband radar to your display | Broadband 3G/4G™ Radar Installation Guide