MSI 661FM2-LSR User Guide - Page 82

Introduction to SiS964 SATA RAID Installing Software Install Driver in Windows XP / 2000 MSI Reminds You... If you would like to install windows to any RAID set, you should create RAID from BIOS RAID setting Utility first and then follow the steps below. h New Windows XP / 2000 Installation The following details the installation of the drivers while installing Windows XP / 2000. 1. Start the installation: Boot from the CD-ROM. Press F6 when the message "Press F6 if you need to install third party SCSI or RAID driver" appears. 2. When the Windows XP/2000 Setup window is generated, press S to specify an Additional Device(s). 3. Insert the driver diskette into drive A: and press . (The information of this driver diskette exists in MSI CD. Please prepare for one formatted floppy disk to copy the contents in the Floppy folder of the following access: Insert MSI CD and start the menu --> click IDE folder --> SIS --> 180RAID --> Floppy) 4. Choose one of the following items: "WinXP SiS Raid/IDE Controller", "Win2000 SiS Raid/IDE Controller" from the drop-down list that appears on screen, and press the key. 5. Press to continue with installation or if you need to specify any additional devices to be installed, do so at this time. Once all devices are specified, press to continue with installation. 6. From the Windows XP/2000 Setup screen, press the key. Setup will now load all device files and then continue the Windows XP/2000 installation. 7. Please install the driver package again (ex. SiS RAID driver v1.02) while the operation system has been setup. h Existing Windows XP/2000 Driver Installation 1. Insert the MSI CD into the CD-ROM drive. 2. Install the driver by execute SiS RAID driver setup utility. 3. The drivers will be automatically installed. 4-21