Mackie 1402-VLZ Pro Owner's Manual - Page 28
Specifications
View all Mackie 1402-VLZ Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
SPECIFICATIONS Main Mix Noise 20Hz-20kHz bandwidth, 1/4" Main out, channels 1-6 Trim @ unity gain, channel EQs flat, all channels assigned to Main Mix, channels 1 and 3 Pan left, 2 and 4 Pan right. Main Mix fader down, channel faders down: -100.0dBu Main Mix fader unity, channel faders down: -86.5dBu (90dB Signal-to-Noise Ratio, ref +4dBu) Main Mix fader @ unity, channel faders @ unity: -84.5dBu Total Harmonic Distortion (THD) 1kHz @ +14dBu, 20Hz-20kHz Mic pre @ insert : 0.0007% Attenuation (Crosstalk) 1kHz relative to 0dBu, 20Hz-20kHz bandwidth, Line in, 1⁄4" Main Out, Trim @ unity Main fader down: Channel Alt / Mute switch engaged: Channel fader down: -85dBu -84dBu -83dBu Frequency Response Mic input to any output 20Hz to 60kHz: 20Hz to 100kHz: +0dB/-1dB +0dB/-3dB Equivalent Input Noise (EIN) Mic in to Insert Send out, max gain 150 ohm termination: -129.5dBm unweighted Common Mode Rejection (CMR) Mic in to Insert Send out, max gain 1kHz: better than -90dB Maximum Levels Mic in: Tape in: All other inputs: Main Mix XLR out: All other outputs: +22dBu +16dBu +22dBu +28dBu +22dBu Impedances Mic in: Channel Insert return: All other inputs: Tape out: All other outputs: 1.3 kilohms 2.5 kilohms 10 kilohms or greater 1.1 kilohms 120 ohms EQ High Shelving: Mid Peaking: Low Shelving: +/-15db @ 12kHz +/-12dB @ 2.5kHz +/-15db @ 80Hz Power Consumption 120VAC, 50/60Hz, 25 watts Fuse Rating 120V: 220-240V: 500mA slo blo, 5 x 20mm 250mA slo blo, 5 x 20mm 2.9" (7.4cm) 14" (35.6cm) 2.9" (7.4cm) 13.1" (33.27cm) 12.9" (32.8cm) 8 rack spaces WEIGHT 9.5 lbs. (4.5 kg.) Mackie Designs is always striving to improve our mixers by incorporating new and improved materials, components and manufacturing methods. Because we're always trying to make things better, we reserve the right to change these specifications at any time, without notice. 28