Magnavox 50ML8305D User manual, English (US) - Page 33

English Using the OSD menus Channel Setup Menu The channel setup menu helps you to configure and set up channels.You can set the tuner for signals from the antenna or a cable receiver, search for channels, and edit the favorite channels Main Menu Picture Sound Size PIP/PBP Parental Control Channel Setup Setup Exit Tuner Mode Antenna Cable Channel Search Press right Manual Search 30 Favorite Channel Edit Press right Reset Channel Back . Component Tuner Mode Channel Search Manual Search Function Range / Options Specifies antenna or cable input for the Antenna, Cable Analog signal. Specifies antenna input for the Digital signal. Scans for channels automatically. See - "Channel Search" below. Enables you to manually search for channels.† 2 ~ 69 Favorite Channel Edits the favorite channel list. See "Favorite - Channel List" on page 28. Reset Channel Clears all channels that were added to the - channel list using the Channel Search fea- ture. After using this function, use Channel Search to rescan for channels.† † This selection is only available when the input signal is digital. Channel Search Use this option to start scanning for channels automatically as follows: 1. Select the Channel Search item from the channel setup menu and press to start scanning for channels automatically. Scanning begins. 2. Press OK at any time to stop scanning. Auto Scanning Antenna RF Channel: 11 Major Number: 2 Auto Scanning Cable RF Channel: 11 RF Channel: 11 Digital signal auto scan OSD Analog signal auto scan OSD 27