Magnavox MDR700 User manual, English (US) - Page 11
Connecting power adapter
View all Magnavox MDR700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English Connecting power adapter IMPORTANT! - Do not connect the power cord until all other connections have been made. - Never make or change any connections with the power switched on. Note - Each time you restart the set, it stores the last function used. This set is powered via a power adapter (supplied). See the following diagram for details. AC120V~ 1 Connect the AC adapter to the jack marked with DC 12V IN on the rear panel of the set. 2 Plug the two-prong end of the power cord to a grounded power outlet. 3 When not using the set, turn off the power of the set before unplugging the power connector to prevent malfunctions. Connections 11
11
English
Connections
Connecting power adapter
IMPORTANT!
–
Do not connect the power cord until
all other connections have been made.
–
Never make or change any
connections with the power switched on.
Note
–
Each time you restart the set, it stores the last
function used.
This set is powered via a power adapter
(supplied). See the following diagram for details.
1
Connect the AC adapter to the jack marked
with
DC 12V IN
on the rear panel of the set.
2
Plug the two-prong end of the power cord to a
grounded power outlet.
3
When not using the set, turn off the power of
the set before unplugging the power connector
to prevent malfunctions.
AC120V~