Magnavox MDR700 User manual, English (US) - Page 23

System Menu Options English Skip ● To activate Skip, press 2. ➜ The current channel will be skipped when you use 3 / 4 to select channels. ● To deactivate Skip, press 1. ➜ The channels will be played in sequence when you select normal playback. Fine Tuning 1 Press 3 / 4 to select Fine Tuning. 2 Press 1 / 2 to tune your channel. Auto Memory 1 Press 3 / 4 to select Auto Memory. 2 Press OK to enter the Auto Memory mode. 3 Move the cursor by pressing 3 / 4 to highlight the selected item. 4 If necessary, press OK to confirm. 5 Press 1 / 2 to adjust values/ setting. ● Press DVD SETUP on the remote control. General Setup The options included in General Setup page are: 'TV Display', 'OSD Lang', 'Captions' and 'Screen Saver'. - - General Setup Page - - SEARCHING CH 009 EXIT ➜ The Auto Memory process takes a few minutes, in which the set starts searching channels from the lowest to highest in the standard channel list. ➜ When this process ends, the set exits and stores the channels by sequence in the memory. To exit auto memory ● Press 1 during tuning. To select the desired channel ● Press 3 / 4. DVD SETUP General navigation The options included in DVD SETUP page are: 'General Setup', 'Speaker Setup', 'Dolby Digital Setup', 'Video Setup' and 'Preference Setup'. 1 Press 3 / 4 to highlight an option. 2 Enter its submenu by pressing 2. TV display ● Select Normal/PS or Normal/LB for TV display at 4:3 aspect ratio. ● Select Wide for TV display at 16:9 aspect ratio. OSD Lang There are three different OSD languages for selection. ● Select English, Spanish or French. Captions ● Select to activate/deactivate captions ON/OFF during playback. Screen Saver ● Select to activate/deactivate the screen saver. ➜ To save energy, your activated screensaver automatically powers down to standby mode when the screensaver appears for several minutes. 23