Magnavox MHT983 Owners Manual - Page 9

BT Mode: BT (Bluetooth) pairing: First time use or re-pairing the unit to a new BT Device, pair as follows: 1. Power on the unit and enter to BT mode as previously instructed, the Indicator on the top of unit will illuminate and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the Indicator will stop blinking. 3. If pairing is complete you may now play music with your external BT Device. 4. During playback: • Press the Button on the unit or Remote Control to pause; press again to resume to normal playback. • Press and release the or buttons on the unit or Remote Control repeatedly to skip tracks. • Press the Volume +/- buttons on the unit or the +/- buttons on the Remote Control to adjust volume level. • Press the LIGHT Button on the unit or Remote Control to turn off the Decorative LED Lights on the speakers. Press again to turn it on. • Turning the DJ Effect Knob to creating DJ effect. • Press the MUTE Button on the Remote Control to mute the sound; press again to turn it back. 5. When finished listening, press the Button on the unit or Remote Control to turn the unit to standby mode. The STANDBY/AUX IN Indicator on the top of unit will illuminate. Notes: • • When the external BT Device searched the unit, our model number "MHT983" will appear on the display of external BT Device. If while pairing you are asked for a code please try "0000" or "1234". Normal operation after pairing: 1. Power on the external BT Device and enter to BT playback mode. 2. Power on the unit and enter to BT mode as previously instructed. The Indicator will illuminate and blink. 3. Wait a few seconds until the unit is automatically paired to the external BT Device. The Indicator will stop blinking. 4. After pairing is complete you may now play music with your external BT Device. 8