Marantz RC1400 RC1400 User Manual - Page 13

ENGLISH Battery Replacement Interval Under normal usage, alkaline batteries last approximately four months. When the batteries wear out, a battery mark is displayed on the LCD. Although the remote control can still be used when the battery mark is displayed, the batteries should be replaced as soon as possible. The LCD eventually starts to flash when buttons are pressed, the remote control will be unable to transmit signals or learn codes. • This remote control uses non-volatile memory so that the learned codes and macro programs are retained even if the batteries are removed. Reset the clock after replacing the batteries. Safety Precautions for Batteries Be sure to always observe the following precautions to prevent fluid leakage, overheating, fire, breakage, accidental ingestion, and other accidents. • If the batteries are left unused for a long period of time, the battery fluid may leak or the batteries may corrode. • Do not use the batteries in the remote control with the plus and minus polarity reversed. • Do not attempt to recharge, heat, or disassemble the batteries. Do not put the batteries in a fire. • Do not use the remote control with old batteries or worn-out batteries inserted. • Do not use different types of batteries or mix old and new batteries in the remote control. • If the remote control is not operating properly, replace the batteries with new ones. • If any of the batteries are leaking, completely wipe up all leaked battery fluid, and then replace the batteries with new ones. 3 11 Page 11 03.10.6, 4:17 PM "EPCF
1BHF.BLFS
+11$