Marantz RC1400 RC1400 User Manual - Page 23
In the same way, use
View all Marantz RC1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH If ERROR is displayed on the LCD, some error has prevented the command from being learned. If this happens, repeat the procedure for steps 4 and 5. • After learning is completed, the remote control automatically switches to name rewriting mode. The left end " " indicator on the MENU blinks to indicate that the blinking part can be rewritten. • If no names will be rewritten, press the OK cursor button. The display returns to learning standby mode by pressing the OK cursor button. 7 To change the name, press the numeric buttons !1 to enter the text. • Use the cursor buttons to move to the sections to be rewritten on the LCD. • To change MENU to OSD, press the 5 numeric button !1. Each time the button is pressed, the display cycles through M → N → O → 5 → M. 8 After rewriting of the text is completed, press the OK cursor button @0. To delete text that is already entered, press the 0 button to insert a space. • In this example, MENU is changed to "OSD (space) (space)" in this step, and then OSD is displayed in the right side by pressing the OK button. For details, refer to the section "Rewriting Names". 9 In the same way, use the > button y to select the page, and then press the direct button t to program the codes. 10 After programming the codes for each of the buttons, press the M button r. The USE indicator displays on the LCD, and the newly stored codes can be transmitted. 3 21 Page 21 03.10.6, 4:17 PM "EPCF1BHF.BLFS+11$