Marantz RC3001 User Guide

Marantz RC3001 Manual

Get Marantz RC3001 PDF manuals and user guides View all Marantz RC3001 manuals
Add to My Manuals
Save this manual to your list of manuals

Marantz RC3001 manual content summary:

  • Marantz RC3001 | User Guide - Page 1
    Model RC3001 User Guide Remote Controller
  • Marantz RC3001 | User Guide - Page 2
    For US and Canada Note: This equipment has been tested and found to comply with the limits for a Class B digital radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
  • Marantz RC3001 | User Guide - Page 3
    d'une couverture d'assurance ou dans le cadre de correspondances avec Marantz. IMPORTANT Pour l'obtention d'un service couvert par la garantie, il incombe au client d'établir la , uso e manutenzione dettagliate nel presente manuale o per guasti dovuti ad uso continuato a fini
  • Marantz RC3001 | User Guide - Page 4
    No naked flame sources, such as lighted candles, should be placed on the equipment. - When disposing of used batteries, please comply with governmental regulations or environmental public instruction's rules that apply in your country or area. - No objects filled with liquids, such as vases, shall be
  • Marantz RC3001 | User Guide - Page 5
    RECYCLING This product's packaging materials are recyclable and can be reused. This product and the accessories packed together are the applicable product to the WEEE directive except batteries. Please dispose of any materials in accordance with your local recycling regulations. When discarding the
  • Marantz RC3001 | User Guide - Page 6
    • Rechargeable battery pack • Multi Voltage AC adapter x2 (RC3001 (Charging) and RX3001) • IR Emitter cable (3m (10ft)) x5 • 3.5mm Mono plug cable (3m (10ft)) • USB cable • User guide FEATURES RC3001 : Remote controller • Versatile Learning Capability with 4Mbit (512KB) User Memory (Max 1000 codes
  • Marantz RC3001 | User Guide - Page 7
    to change the batteries when the operation of the Remote controller becomes unreliable. If you want to order new batteries, please contact your Marantz authorized dealer or Marantz customer service. Warning: Replace the batteries only with original Marantz RC3001 batteries; otherwise the guarantee
  • Marantz RC3001 | User Guide - Page 8
    out. However, the time setting will be lost, and so please set the time setting again. • Although it is not a problem if the remote controller is recharged before the power completely runs out, to prolong the lifespan of the rechargeable battery, charging is recommended after lLOWz is displayed. 3
  • Marantz RC3001 | User Guide - Page 9
    ON/OFF button This button is used when controlling devices that have been set with a single power on/off remote r command. e LCD Display Remote controller display r Programable soft buttons t These buttons are used by the Wizz.it 3 editor software to make LCD display and button y operation settings
  • Marantz RC3001 | User Guide - Page 10
    editor software. !1 Charging terminal This terminal is used to connect the supplied AC adapter used to charge the remote controller. REMOTE CONTROLLER LCD the display items in the device modes. B C Battery indicator This displays the remaining battery power. D Sub info. Area Normal operation:
  • Marantz RC3001 | User Guide - Page 11
    software can be used to turn the IR signal transmissions on and off. b IR output jack This jack connects the supplied IR emitter cable. n Key holes These holes are used to mount the remote controller channel. Set to the same channel as the RC3001. Note: The CH selector has eight setting positions
  • Marantz RC3001 | User Guide - Page 12
    mount the RX3001 so that it sticks out from the wall edge. It could get hit by people`s bodies or objects and cause an injury. • Marantz will not be liable for any accidents or injuries that occur due to improper mounting or handling. • When mounting, be careful not to get your
  • Marantz RC3001 | User Guide - Page 13
    ENGLISH 30mm (1-3/16ins.) 2. The positional relationship between the RX3001 key holes and the screw mounting positions are shown in the figure below. Notes: • When mounting the screws to the wall, leave a space between the wall and screw cap as shown in the figure. • You can use attached template
  • Marantz RC3001 | User Guide - Page 14
    other strong source of light to shine onto the player`s infrared signal reception window (remote sensor). Otherwise, the operation of the remote controller may be disabled. • Bear in mind that operating the remote controller may cause other devices operated by infrared rays to be operated by mistake
  • Marantz RC3001 | User Guide - Page 15
    panel of the connected equipment to EXT. IR RF RC3001 Remote controller RX3001 SA-CD Player CD Changer 5 DISC CD CHANGER CC4001 1 2 3 4 5 DISC SKIP STANDBY POWER ON/STANDBY 1 MP3 CD HD CD SUPER VCD DVD AC - 3 SURR ECHO PROGRAM RANDOM REPEAT 1DISC A-B INTRO SPACE 2 LR PBC SLOW
  • Marantz RC3001 | User Guide - Page 16
    IR emitter to the IR output jack. In some cases, this could disable operation. *3 RC3001 Remote controller 3' 39 Set top box CD Changer 1 2 3 4 5 1 MP3 CD HD CD SUPER VCD DVD AC - 3 SURR ECHO PROGRAM RANDOM REPEAT 1DISC A-B INTRO SPACE 2 LR PBC SLOW STEP RESUME NTSC PAL 3 DISC
  • Marantz RC3001 | User Guide - Page 17
    ENGLISH SETUP SETTING THE IR OUTPUT LEVEL The DIP switches at the bottom of the CH4 with two setting positions for each channel. CH1 CH2 CH3 CH4 • The RC3001 default channel is channel 1. • To change the channel of the remote controller, change the channel setting in the Wizz.it 3 editor. 12
  • Marantz RC3001 | User Guide - Page 18
    ENGLISH SETTING THE GROUP ID SELECTOR The RC3001 can use the Wizz.it 3 editor to set the group ID for each device. If a different ID signal is sent from the remote controller, no control signal is output from the RX3001. Normally, set to lID1z when not using the group ID function. Group ID 1
  • Marantz RC3001 | User Guide - Page 19
    `s environment, to be built. The Wizz.it 3 editor software can be downloaded from www.marantz.com. For more information about the setting procedures, see the PC Editor Software Wizz.it 3 User Guide. This is the basic operation procedure for the RC3001. 1. Press the Home button to enter Home mode for
  • Marantz RC3001 | User Guide - Page 20
    so that its infrared signal transmitter is facing the infrared signal receiver on the Marantz remote controller at a distance of about 2 inches (0.05 m). 2. Display the MAIN MENU on the LCD of the RC3001, and then press the button next to the lLEARNINGz indicator. 3. The screen appears as
  • Marantz RC3001 | User Guide - Page 21
    can be due to transmission of a special remote controller signal code. Learning cannot be performed when a special remote controller signal code is used. • The RC3001 can learn up to a maximum of 1,000 remote controller codes. Once 1,000 codes are programmed for learning, lLEARNFULLz is displayed on
  • Marantz RC3001 | User Guide - Page 22
    ENGLISH 2. TIMER The timer function of the RC3001 can be used to send a preset remote controller command at a programmed time. The Wizz.it 3 editor can be used to operate multiple devices. One Touch Operation (Macro) can also use the timer function for transmission. OPERATION
  • Marantz RC3001 | User Guide - Page 23
    . • If a command assigned to the SOFT button is to be sent by timer programming, use the < and > buttons when selecting the command to move the page, and • The timer settings are displayed. Check that the settings are correct. Setup time Device name HARD or SOFT button Key name EVERYDAY or ONE TIME
  • Marantz RC3001 | User Guide - Page 24
    ENGLISH OPERATION ON/OFF SETTINGS 1. Press the button next to the lON/OFFz indicator in the TIMER menu screen on the LCD to display the timer operation ON/OFF setting screen. 3. Either press the ENTER button or wait three seconds so that lCOMPLETEDz is displayed on the LCD and the operation
  • Marantz RC3001 | User Guide - Page 25
    to the SYS.SETUP menu. • Pressing the Home button returns the LCD to the MAIN MENU. Notes: The clock can become out of sync over time. Please check it occasionally and set to the correct time if necessary. The clock setting is not backed up when the battery pack is replaced. Please reset the
  • Marantz RC3001 | User Guide - Page 26
    BACKLIGHT ILLUMINATION TIME SETTING) Press the LIGHT button on the RC3001 to turn on the backlight, then set the time setting is completed. 1. Press the button next to the lBACKLIGHTz indicator in the SYS.SETUP menu screen in the LCD to display the backlight illumination time setting screen. •
  • Marantz RC3001 | User Guide - Page 27
    the time that the LCD remains on, after a button is pressed on the RC3001. When there are no operations and the LCD is turned off, this setting enables power consumption to be reduced and the life of the battery pack to be extended. The default setting is 10 seconds. 1. The LCD setting menu
  • Marantz RC3001 | User Guide - Page 28
    : +, left: -) to adjust the contrast level. BEEP (BEEP SOUND SETTING) This sets the built-in beep sound in the RC3001. 1. Press the button next to the lBEEPz indicator in the SYS.SETUP menu screen in the LCD to display the beep setting screen. 2. Press the button next to the lENABLEz or lDISABLEz
  • Marantz RC3001 | User Guide - Page 29
    MEM CLEAR (INITIALIZATION SETTING) This returns the settings made in the RC3001 to their initial settings. Note: The LEARNING and CLOCK settings are not initialized. 1. Press the button next to the lMEM CLEARz indicator in the SYS.SETUP menu screen in the LCD to display the initialization setting
  • Marantz RC3001 | User Guide - Page 30
    RC3001. Note: Perform the reset with the battery pack loaded. 6. PROGRAMMABLE CODES NUMBER OF PROGRAMMABLE CODES This remote control has Flash memory 4M bit (512KB) that enables it to program remote control signals include the learned codes for up to 8000 codes. This number is for Marantz remote
  • Marantz RC3001 | User Guide - Page 31
    SPECIFICATIONS RC3001 LCD Resolution 11x81pixel x6 line 9x81pixel x1line" Backlight EL back light Transmission IR or RF Learning Capability: MAX 1000code Operating/ learning IR frequency range Up to 455kHz RF carrier frequency 433.92MHz Rechargeable battery pack NiMH Battery Pack 700
  • Marantz RC3001 | User Guide - Page 32
    ENGLISH RX3001 RF carrier frequency 433.92MHz Operating/ learning IR frequency range Up to 100kHz IR emitter output x6 Dimensions (W x H x L) ... 102 x 63.5 x 27 mm (4-1/16 x 2-1/2 x 1-1/8 ins.) Unit Weight 90g (0.2lbs) AC Adapter Power Supply 100 V-240 V AC / 50-60 Hz Power Output DC9V 800mA
  • Marantz RC3001 | User Guide - Page 33
    has expired, repairs will be performed for a charge if the equipment can be returned to normal operation. In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the
  • Marantz RC3001 | User Guide - Page 34
    www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China 09/ 2007 00M43CW851010 mzh-d
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
Model RC3001
User Guide
Remote Controller