Marantz RC3001 User Guide - Page 27
Lcd Lcd Setting
View all Marantz RC3001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ENGLISH LCD (LCD SETTING) Press the button next to the lLCDz indicator in the SYS.SETUP menu screen in the LCD. The LCD setting menu is displayed. 3. The message lCOMPLETEDz is displayed on the LCD to indicate that the display time setting is completed. LCD TIMER (LCD timer setting) This sets the time that the LCD remains on, after a button is pressed on the RC3001. When there are no operations and the LCD is turned off, this setting enables power consumption to be reduced and the life of the battery pack to be extended. The default setting is 10 seconds. 1. The LCD setting menu is displayed, and so press the button next to lLCD TIMERz in the LCD display. 2. Press the buttons (right: +, left: -) displayed next to TIME to set the display time. The time can be set in 1-second intervals from 10 to 60 seconds. To leave the LCD always on, press the button next to the lALWAYS ON` indicator. However, please note that this setting will shorten the life of the battery pack. After deciding the settings, press the ENTER button. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu. • Pressing the Home button returns the LCD to the MAIN MENU. Note: If the LCD is turned off by the LCD timer, pressing any of the buttons on the remote controller will turn it on again. When the LCD is turned on, the pressed command is not activated. To execute a command operation, press the button while the LCD is on. 22