Marantz SA-11S2 SA-11S2 pcf file - Page 12

Rear Panel

Page 12 highlights

ENGLISH NAMES AND FUNCTIONS REAR PANEL R R ANALOG OUTPUTS UNBALANCED COLD (-) HOT (+) GND BALANCED L L AC IN EXT.CLOCK INPUT DIGITAL OUTPUTS COAX. MODEL NO. SA-11S2 OPT. A B A ANALOG OUTPUTS UNBALANCED connectors These are the unbalanced output jacks of the analog audio signals. The analog connection cord can be connected to the CD, AUX, or other connectors on an amplifier. Be sure to connect the L and R channels correctly to the corresponding jacks. Note: Never connect to the PHONO connector on the amplifier. B ANALOG OUTPUTS BALANCED connectors These are the balanced output jacks of the analog audio signals. A balanced connection cord (available commercially) can be connected to the balanced input jack of the amplifier. Be sure to connect the L and R channels correctly to the corresponding jack. (See page 23) Note: If connecting the balanced output jacks, be sure to leave the unbalanced jacks unconnected. (The balanced and unbalanced connectors cannot be used at the same time.) C EXT. CLOCK INPUT (External clock) Connector This is the input connector for the clock frequency from an external master clock generator. Connect the master clock generator to the BNC terminal coaxial cable (75 Ω). CD E F D DIGITAL OUTPUTS COAX. (Coaxial digital output connector) The audio CD signal being played is output digitally. Connect a recording device, amp, D/A converter etc. that has a coaxial digital input connector using a commercially available coaxial cable. Notes: • No signal is output when Digital Out OFF is set. • No signal is output when playing a super audio CD. E DIGITAL OUTPUTS OPT. (Optical digital output connector) The audio CD signal being played is output digitally. Connect a recording device, amp, D/A converter etc. that has an optical digital input connector using a commercially available square-shaped optical cable. Notes: • No signal is output when Digital Out OFF is set. • No signal is output when playing a super audio CD. F AC POWER INPUT JACK Connect the supplied power cord to this jack and a household AC power outlet. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

9
ENGLISH
NAMES AND FUNCTIONS
REAR PANEL
A
ANALOG OUTPUTS UNBALANCED
connectors
These are the unbalanced output jacks of the analog audio
signals. The analog connection cord can be connected to
the CD, AUX, or other connectors on an amplifier. Be
sure to connect the L and R channels correctly to the
corresponding jacks.
Note:
Never connect to the PHONO connector on the
amplifier.
B
ANALOG OUTPUTS BALANCED
connectors
These are the balanced output jacks of the analog
audio signals. A balanced connection cord (available
commercially) can be connected to the balanced input
jack of the amplifier. Be sure to connect the L and R
channels correctly to the corresponding jack. (See page
23)
Note:
If connecting the balanced output jacks, be sure to leave
the unbalanced jacks unconnected. (The balanced and
unbalanced connectors cannot be used at the same
time.)
C
EXT. CLOCK INPUT (External clock)
Connector
This is the input connector for the clock frequency from an
external master clock generator.
Connect the master clock generator to the BNC terminal
coaxial cable (75
Ω
).
D
DIGITAL OUTPUTS COAX.
(Coaxial digital output connector)
The audio CD signal being played is output digitally.
Connect a recording device, amp, D/A converter etc. that
has a coaxial digital input connector using a commercially
available coaxial cable.
Notes:
• No signal is output when Digital Out OFF is set.
• No signal is output when playing a super audio CD.
E
DIGITAL OUTPUTS OPT.
(Optical digital output connector)
The audio CD signal being played is output digitally.
Connect a recording device, amp, D/A converter etc. that
has an optical digital input connector using a commercially
available square-shaped optical cable.
Notes:
• No signal is output when Digital Out OFF is set.
• No signal is output when playing a super audio CD.
F
AC POWER INPUT JACK
Connect the supplied power cord to this jack and a
household AC power outlet.
BALANCED
HOT (+)
GND
L
R
ANALOG OUTPUTS
EXT.CLOCK INPUT
DIGITAL OUTPUTS
UNBALANCED
L
R
COAX.
OPT.
AC IN
MODEL NO.
SA-11S2
COLD (
-
)
A
B
C
D
E
F