Marantz SA-11S2 SA-11S2 pcf file - Page 9

ENGLISH BEFORE USING 7 Loading batteries Before using the remote controller for the first time, load the batteries in the remote controller. The batteries provided are used to verify the operations of the remote controller only. 1 Remove the battery cover. 7 Usage of remote controller Operational range Operate the unit with the remote controller within the range of the illustration below. Approx. 16.4 ft. (5m) 2 Insert the batteries with correct +/- orientation. Two AAA-size (R03) batteries 3 Close the battery cover until it clicks shut. 7 Cautions on handling batteries Misuse of the batteries can result in electrolyte leakage, rupturing, corrosion, etc. Bear in mind the following points when using batteries. • Remove the batteries from the remote control unit if the unit is not going to be used for a prolonged period (a month or more). • Do not use an old battery together with a new one. • Insert the batteries while ensuring that their ª and · poles are properly aligned with the corresponding markings on the remote control unit. • Batteries with the same shape may have different voltages. Do not use different types of batteries together. • If electrolyte has leaked, thoroughly wipe the inside of the battery compartment, and then insert new batteries. • When batteries which are no longer required are to be discarded, follow the directions (regulations) laid down by the local authorities in the area concerned for their disposal. Remote control unit Precautions • Do not allow direct sunlight, an inverter fluorescent light or other strong source of light to shine onto the player's infrared signal reception window (remote sensor). Otherwise, the operation of the remote control unit may be disabled. • Bear in mind that operating the remote control unit may cause other devices operated by infrared rays to be operated by mistake. • The remote control unit cannot be operated if the space between the controller and the player's remote sensor is obstructed. • Do not place any objects on top of the remote control unit. Doing so may cause one or more buttons to be held down which will cause the batteries to run down. 6