Marantz SA-11S2 SA-11S2 pcf file - Page 16

ENGLISH CONNECTIONS 1. Connect the audio cable q to this unit's front speaker outputs and the stereo inputs on your amplifier, receiver or stereo system. 2. Connect the optical cable w, coaxial cable e to the digital input on your AV amplifier, D/A converter, CD-R, etc.. * Signal will be output from the digital audio out jacks (OPT./COAX.) only when an Audio CD disc is played. No signal is output when playing a Super Audio CD. 3. When connecting to an external master clock generator, use the BNC terminal coaxial cable (75Ω) r. Note: Signals are output from the DIGITAL OUTPUTS connector (OPT., COAX.) only when an audio CD is being played. No signal is output when playing a super audio CD. TIMER PLAY This unit can perform timer play by cooperating with your audio timer. Connect this unit's power cord to the audio timer's power socket and the timer's power cord to power outlet. For connection to audio timer and it's operation, please refer to the instruction manual of your audio timer. Audio Timer AC IN CONNECTING THE POWER SUPPLY 1 Plug the power cable into AC IN jack on the back panel. AC IN Setting method of Timer Play q Press POWER switch to turn ON the power. w Insert the disc to be played. * In timer play mode, tracks are played normally. e Set the audio timer. 2 Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector on the connected unit to this unit. 3 Plug the power cable into an AC outlet. 13