Marantz SA-11S2 SA-11S2 pcf file - Page 21

ENGLISH OPERATION To Check the Programmed Tracks Press the RECALL/SCROLL button on the remote control during the program or when the program is stopped ("PROG" lights up). Every time press RECALL/SCROLL button, the programmed tracks will be displayed one after the other in order. To Delete a Programmed Track q Press CANCEL button in stop mode when program has been made (When "PROG" indicator is lighting up). w Everytimepress CANCEL button,theprogrammedtracks are deleted in order from the last track programmed. Also, the deleted track's track number indicator will disappear. To Clear Whole Program Press STOP button two times while in program play. In the stop mode, press STOP button once. Program can also be cleared by pressing OPEN/CLOSE key to open the disc tray. To Add Tracks to Program Tracks can be added to the end of program when program is remaining ("PROG" indicator is lighting up) and in stop mode. However tracks cannot be added to the program when the RNDM (random) indicator is lit up. * Please be careful about the following matters. • When programming 1st through 9th tracks in a disc that has over 10 tracks by using numeric buttons. For instance, programming the 3rd track after programming the 1st track, press 3 button more than approximately 1.5 seconds after 1 button is pressed. When a program is finalized, the time is updated. • Likewise, when programming a track at 10th or after. For example, to program 13th track, press 3 button within approximately 1.5 seconds after 1 button is pressed. • When programming a track in a disc that has less than 9 tracks. For instance, to program the 5th track after 4th track has been programmed, press 5 button more than approximately 0.5 second after 4 button is pressed. Q&A • How many tracks can be programmed? Up to 30 tracks can be programmed for program play. • Can I listen to program play repeatedly? Press REPEAT button once. " " "ALL" indicator will light and program play will be repeated. • Can I shuffle the programmed track order? Press RANDOM button in stop mode. SEARCHING YOUR FAVORITE TRACKS (AMS (AUTOMATIC MUSIC SCAN) PLAY) This feature is convenient to search where your favorite track is. If the AMS button is pressed while a track is stopped, the AMS indicator lights up, and the first ten seconds of each track on the disc will be played starting from the first track. Also, if the AMS button is pressed during playback, the AMS indicator lights up, and the program jumps to the next track after approximately 10 seconds elapses on the display time. Light up Once you find a song that you want to listen to, press the AMS button again or press the PLAY button. The AMS indicator turns off, and normal playback resumes from the current track. Note: If the AMS button is pressed after the tracks are programmed, only the programmed tracks are played by AMS. 18