Marantz SR5001 Marantz AV Receiver IR Remote Code List - Page 32

29

ENGLISH

8

MULTI ROOM (SR5001 only)

SR5001 has features in MULTI ROOM SYSTEM

such as source selector, sleep timer, Multi Room

Speaker output and remote control.

You can set these feature in this sub-menu.

8 MULTI ROOM

AUDIO

: DVD

SLEEP TIMER

: OFF

MULTI:OUT

: STEREO

MULTI:OFF

MSPK

:

VOL

: VARI

LEVEL

: -90dB

--- MAIN ROOM STATUS ---

VIDEO:DVD

AUDIO:DVD

MAIN

EXIT

1.

Select “

MULTI ROOM

” in the SETUP MAIN

MENU with

3

or

4

cursor button, and press the

ENTER

button.

2.

To Select desired contents, press

3

or

4

cursor

button

AUDIO:

Select the audio source of the Multi-room output

with

1

or

2

cursor buttons.

SLEEP TIMER:

SLEEP timer function is available during the

multiroom is active, set the time with

1

or

2

cursor

buttons.

MULTI OUT:

To switch MULTI and MSPK outputs to either

STEREO or MONO, press

1

or

2

cursor button.

MULTI (MULTI ROOM):

To switch on the Multi-room output ON or OFF,

press

1

or

2

cursor button.

VOL (VOLUME SETUP):

Select whether the Multi-room output level is

variable or ﬁxed with a

1

or

2

cursor buttons.

LEVEL (VOLUME LEVEL):

Adjust the Multi-room output level with

1

or

2

cursor buttons.

MSPK B (MULTI SPEAKER B):

To switch on the Multi-speaker B output ON or

OFF, press

1

or

2

cursor buttons.

Note:

This setting can be changed when the Surr Back is set

“NONE” in 2-1 SPEAKER SIZE menu. When this

setting is unavailable, “

✽✽✽

” is displayed

VOL (VOLUME SETUP):

Select whether the Multi-speaker output level is

variable or ﬁxed with a

1

or

2

cursor buttons.

Note:




✽✽✽

” is displayed

7

7.1 CH INPUT LEVEL

This sub-menu is to adjust the speaker levels for 7.1-

channel input sources.

Here you will adjust the volume for each channel so

that they are all heard by the listener at the same

level.

7 7.1 CH. INPUT LEVEL

VIDEO-IN

:

LAST

FRONT L

:

0 dB

CENTER

:

0 dB

FRONT R

:

0 dB

SURR.R

:

0 dB

SURR.B R

:

0 dB

SURR.B L

:

0 dB

SURR.L

:

0 dB

SUB W

:

0 dB

MAIN

EXIT

1.

Select “

7.1CH INPUT

” in the SETUP MAIN

MENU with the

3

or

4

cursor buttons, and

press the

ENTER

button.

2.

To select “

VIDEO IN

”, press

3

or

4

cursor

button.

3.

Using the

1

or

2

cursor buttons, select the

video input source which is emitted from

Monitor out in the 7.1 CH INPUT function.

The input source is switched by pressing the

1

or

2

cursor buttons as follows;

LAST

↔

TV

↔

DVD

↔

VCR1

↔

DSS

↔

AUX1

↔

V-OFF

↔

LAST

↔

Notes:

•

When select LAST, the source is set previous source

before 7.1 CH INPUT function

is activated.

•

When select V-OFF, no signal is emitted from monitor

out terminal.

4.

To Select desired channel , press the

3

or

4

cursor buttons.

5.

Using the

1

or

2

cursor buttons, adjust the

volume level of each channel.

6.

After you complete this portion of the set up,

move the cursor to “

MAIN

” with the

3

or

4

cursor buttons and press the

ENTER

button.

Notes:

•

These settings will be memorized to 7.1CH INPUT

source.

• This feature can be directly selected with the

CH.SEL

button of the remote controller.

LEVEL (VOLUME LEVEL):

Adjust the Multi-speaker output level with

1

or

2

cursor button.

Note:




✽✽✽

” is displayed

MAIN ROOM STATUS:

Selected input source in the main room will be

displayed.

Note:

If “VOLUME” is set to “FIXED”, the multi-room

output level cannot be adjusted from the second zone.

After you complete this portion of the set up, move

the cursor to “

MAIN

” with

3

or

4

cursor buttons and

press

ENTER

button.

Marantz SR5001 Marantz AV Receiver IR Remote Code List - Page 32

Multi Room Sr5001 Only, 1 Ch Input Level

Page 32 highlights