Marantz SR5011 Owner s Manual In English - Page 179

Contents Connections Playback o HDMI Video Output Select the HDMI monitor connector to be used. Auto(Dual) (Default): Monitor 1: Monitor 2: The presence of a TV connected to the HDMI MONITOR 1 or HDMI MONITOR 2 connector is detected automatically, and that TV connection is used. A TV connected to the HDMI MONITOR 1 connector is always used. A TV connected to the HDMI MONITOR 2 connector is always used. 0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are connected and "Resolution" is set to "Auto", the signals are output with a resolution that is compatible with both TVs. (v p. 181) When the "Resolution" setting in the menu is not set to "Auto", set the resolution in "Video" - "HDMI Monitor 1" and "HDMI Monitor 2" to one that is compatible with both TVs. (v p. 227) 0 You can check which resolutions are compatible with your TV in "HDMI Monitor 1" and "HDMI Monitor 2". (v p. 227) Settings Tips Appendix o Video Mode Configure the video processing method to match the type of video content. Auto (Default): Game: Movie: Process video automatically based on the HDMI content information. Always process video for game content. Minimize the video delay when the video is delayed compared to the button operations on the controller of the game console. Perform image processing that is suitable for contents other than games. 0 If "Video Mode" is set to "Auto", the mode is switched according to the input contents. Front panel Display Rear panel 179 Remote Index