Marantz SR5011 Owner s Manual In English - Page 241

Contents Connections Playback Settings Tips Appendix Symptom While the menu is being displayed, no video is shown on the TV. Cause / Solution 0 The video being played will not appear in the background of the menu when the menu is operated during playback of the following video signals. - Some images of 3D video contents - Computer resolution images (example: VGA) - Video with an aspect ratio other than 16:9 or 4:3 - 4K video o The menu screen is not displayed on the TV Symptom Cause / Solution The menu screen or status 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is information screen is not connected to a TV using a different video output connector, operate while watching the display on this displayed on the TV. unit. 0 The status information will not appear on the TV when the following video signals are being played. - Some images of 3D video content - Computer resolution images (example: VGA) - Video with an aspect ratio other than 16:9 or 4:3 0 When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is not displayed properly. 0 In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a sound mode other than the pure direct mode. 0 Set the "TV Format" setting in the menu to a selection that is appropriate for the TV. Page － Page － 227 227 126 184 Front panel Display Rear panel 241 Remote Index