Marantz SR5011 Owner s Manual In English - Page 236
No sound comes out
View all Marantz SR5011 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom Cause / Solution No sound comes out of speakers. 0 Check the connections for all devices. 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. 0 Securely tighten the speaker terminals. Check speaker terminals for looseness. 0 Check that a proper input source is selected. 0 Adjust the volume. 0 Cancel the mute mode. 0 Check the digital audio input connector setting. 0 Check the digital audio output setting on the connected device. On some devices, the digital audio output is set to off by default. 0 When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the speaker terminal and PRE OUT connector. No sound comes out when 0 When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a using the DVI-D separate audio connection. connection. No sound comes out of a TV that is connected via HDMI. 0 Audio signals input to 7.1CH IN connectors on this unit cannot be output to the TV. Page 27 34 34 69 70 70 185 - - - - Front panel Display Rear panel 236 Remote Index