Marantz SR7400 SR7400 User Guide - Page 31

ENGLISH BASIC OPERATION (TUNER) LISTENING TO THE TUNER Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country's standard is 9 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change. Note: • Preset memory for the tuner will clear by changing this setup. AUTO TUNING 3. 2. 1. R MEMORY TUNING F/P MODE S A/B MULTI MULTI SPEAKER 7.1CH INPUT AUX2 DVD VCR1 DSS/VCR2 AUX1 CD-R TAPE CD TUNER DOWN MUTE DIGITAL S-VID SOURCE USE PAGE 2 M 3. D1 D2 3. D3 D4 2. D5 TUNER CD CD-R MD TAPE 1 AUX1 AUX2 LIGHT RC1400 Learning Remote Controller AMP 2 1. (Using the SR7400) 1. To select tuner and desired band (FM or AM), press the TUNER button on the front panel. 2. F/P button on the front panel to display the frequency. 3. Press the TUNING or button on the front panel for more than 1 second to start the Auto tuning function. 4. Automatic searching begins then stops when a station is tuned in. (Using the remote control unit) 1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote. 2. Press the > button until PAGE2 is displayed. 3. Press and hold the SCAN+ (D1) or SCAN- (D2) button for 1 second or more. 4. Automatic searching begins then stops when a station is tuned in. If tuning does not stop at the desired station, use to the "Manual tuning" operation. MANUAL TUNING 3. 2. 1. SOURCE M 3. D1 D2 3. D3 R MEMORY S A/B MULTI TUNING F/P MULTI SPEAKER 7.1CH INPUT MODE AUX2 DOWN MUTE USE PAGE 2 D4 2. D5 DVD VCR1 DSS/VCR2 AUX1 CD-R TAPE CD TUNER DIGITAL S-VID TUNER CD CD-R TAPE AUX1 AUX2 MD AMP 1. LIGHT 1 2 RC1400 Learning Remote Controller (Using the SR7400) 1. To select tuner and desired band (FM or AM), press the TUNER button on the front panel 2. Press the F/P (Frequency/Preset) button on front panel, to have the frequency appear on the display. 3. Press the TUNING or buttons. (Using the remote control unit) 1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote. 2. Press the > button until PAGE2 is displayed 3. Press the SCAN+ (D1) or SCAN- (D2) button to tune in the deseired station. DIRECT FREQUENCY CALL PREV MENU TEST 1 7.1CH 4 DISP 7 CLEAR GUIDE CH.SEL 2 ATT 5 OSD 8 0 MUTE EXIT SURR 3 SPK-AB 6 SLEEP 9 MEMO 2. 3. TUNER CD CD-R MD TAPE 1 AUX1 AUX2 LIGHT RC1400 Learning Remote Controller AMP 2 1. 1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote. 2. Press the GUIDE on the remote, display will show "FREQ - - - -". 3. Input your desired station's frequency with the ten numbered keypad on the remote. 4. The desired station will automatically be tuned. (FM) TUNING MODE (AUTO STEREO OR MONO) VOLUME G F/P MODE AKER 7.1CH INPUT AUX2 CD-R TAPE CD TUNER DOWN UP MUTE S-DIRECT DIGITAL AUX1 INPUT S-VIDEO VIDEO L AUDIO R USE PAGE 1 M D1 D2 D3 D4 D5 CH TV DVD VOL VCR DSS TUNER CD CD-R MD TAPE AUX1 AUX2 AMP When in the auto stereo mode, AUTO indicator will be illuminated on the display. The "ST" indicator is illuminsted when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the "TUNED" and "ST" indicators are not illuminated. If the signal is weak, it may be difficult to tune into the station in stereo. In such a case, press the MODE button on the front panel.Or press the TUNER button and press the the > button until PAGE1 is displayed. Press the T-MODE (D4) button. "AUTO" indicator is not illuminated, if FM stereo broadcasts are received in monaural and the "ST" indicator is not illuminated. To return to auto stereo mode, press the MODE button or press T-MODE button on the remote again. AUTO indicator is illuminated the display. PRESET MEMORY With this unit you can preset up to 50 FM/AM stations in any order. For each station, you can memorize the frequency and reception mode if desired. AUTO PRESET MEMORY This function automatically scans the FM and AM band and enters all stations with proper signal strength into the memory. 5. 2. 2.4. 1. 3. SELECTOR AV SURROUND RECEIVER SR7400 VOLUME SELECT STANDBY POWER ON/STANDBY ENTER PHONES CLEAR MEMORY TUNING F/P MODE SPEAKERS A/B MULTI MULTI SPEAKER 7.1CH INPUT AUX2 TV DVD VCR1 DSS/VCR2 AUX1 CD-R TAPE CD TUNER DOWN UP MUTE S-DIRECT DIGITAL AUX1 INPUT S-VIDEO VIDEO L AUDIO R 1. To select FM , press the TUNER button on the front panel. 2. While pressing the MEMORY button, press the TUNING button up. "AUTO PRESET" will appear on the display, and scanning starts from the lowest frequency. 3. Each time the tuner finds a station, scanning will pause and the station will be played for five seconds. During this time, the following operations are possible. The band can be changed by the TUNER button. 4. If no button is pressed during this period, the current station is memorized in location Preset 02. If you wish to skip the current station, press the TUNING button during this period, this station is skipped and auto presetting continues. 5. Operation stops automatically when all 50 preset memory positions are filled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button. MANUAL PRESET MEMORY 2. 4. RECEIVER SR7400 3. CLEAR MEMORY TUNING F/P M SPEAKERS A/B MULTI MULTI SPEAKER 7.1CH INPUT TV DVD VCR1 DSS/VCR2 AUX1 CD-R TAPE CD S PREV MENU TEST 1 7.1CH 4 DISP 7 CLEAR GUIDE CH.SEL 2 ATT 5 OSD 8 0 MUTE EXIT SURR 3 SPK-AB 6 SLEEP 9 MEMO 3. 2. (Using the SR7400) 1. Tune into the radio station you desire (Refer to the "MANUAL TUNING" or "AUTO TUNING" section). 2. Press the MEMORY button on the front panel. "- -" (preset number) starts blinking on the display. 3. Select the preset number by pressing the TUNING or button, while this is still blinking (approx. 5 seconds) 4. Press the MEMORY button again to enter. The display stops blinking. The station is now stored in the specified preset memory location. 28