Marantz VC5400 VC5400 User Manual - Page 12
Connections Continued, Connecting to Optional Equipment, Contimued
View all Marantz VC5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connections (Continued) Connecting to Optional Equipment (Contimued) Analog connection to a multi-channel A/V receiver with 6 Channel connectors (Dolby Digital) This DVD Player contains a multi-channel decoder. This enables playback of DVDs recorded in Multi-channel Surround without the need for an optional decoder. 1 Connect the CENTER and SUB WOOFER jacks for the Center speaker and the Subwoofer (C) to the corresponding in jacks on your receiver. 2 Connect the Left and Right FRONT speaker jacks (F) to the corresponding in jacks on your receiver. 3 Connect the Left and Right REAR speaker jacks (R) to the corresponding in jacks on your receiver. 4 Make the appropriate Sound settings for Analog Output and Speaker Settings in the setup menu. See page 30. Rear of DVD player Notes - Refer to the owner's manual of your audio system as well. - Before you connect the DVD player to other equip- ment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. - If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the tuner and radio. - The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. - Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may be damaged. - When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT jacks of the DVD video player is connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder system must be connected to the DIGITAL OUT jack of the DVD video player. F C R Caution Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers. Amplifier (Receiver) Center Subwoofer Front R Rear R Front L Rear L ANALOG 5.1CH AUDIO INPUT 12