Marantz VC5400 VC5400 User Manual - Page 9

INTRODUCTION Rear Panel OPTICAL (Digital audio out jack) Connect to digital (optical) audio equipment. COAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment. COMPONENT VIDEO OUT (Y, CB/PB, CR/PR) Connect to a TV with Y, CB/PB, CR/PR inputs. AUDIO OUT (Left/Right) Connect to an amplifier, receiver, or stereo system. **REMOTE CONTROL EXTERNAL/INTERNAL Switch * REMOTE CONTROL IN/OUT jack VIDEO OUT Connect to a TV with video inputs. 5.1 CHANNEL AUDIO OUT Connect to a 5.1 channel receiver - center speaker connection - subwoofer connection - front speakers connections - rear (surround) speakers connections S-VIDEO OUT Connect to a TV with S-Video inputs. RS232C Terminal Control terminal for use by custom installers. AC Power Cord Plug into the power source. * REMOTE CONTROL IN/OUT jacks By connecting this DVD player to another Marantz audio component using a supplied System Control cable, you can remotely operate the components as a single system. • When connecting to component with a remote sensor, be sure to connect the "REMOTE CONTROL IN" jack of this DVD player to the "REMOTE CONTROL OUT" jack of the component with the remote sensor. • When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the "REMOTE CONTROL OUT" jack of this DVD player. ** Remote switch • When using this DVD player independently, set this switch to "INTERNAL". When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to "EXTERNAL". Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 9