Maytag MDB4949S Owners Manual 2 - Page 8
Controls And Cycle Status
View all Maytag MDB4949S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
OPTIONS Sanitizes dishes and glassware in accordance with NSF International NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Only sanitizing cycles have been designed to meet the requirements of the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. There is no intention, either directly or indirectly, that all cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. At end of the cycle, the sanitized indicator (or word "sanitized" on some models) will glow. If the load did not properly sanitize, the indicator will flash at the end of the cycle. This can happen if cycle is interrupted or if the water does not reach the required temperature. The light goes off when you open and close the door or press CANCEL. Dries dishes with heat. Use option with rinse aid to provide best drying results. Plastic items are less likely to deform when loaded in top rack. Turn option off for an air dry. CAN BE SELECTED WITH Auto PowerBlast® Normal WHAT IT DOES ADDED TIME TO CYCLE Increases main wash temperature from 105°F (41°C) to 145°F (63°C) and final rinse from 140°F (60°C) to 156°F (69°C). :04 to 1:15 ADDED WATER GALLONS (LITERS) 0-3.0 (0-11.2) Auto Uses heating :29 to :46 0 PowerBlast® element to speed drying times. Normal Quick CONTROL CONTROLS AND CYCLE STATUS PURPOSE COMMENTS Press to start or resume a wash cycle. If the door is opened during a cycle or power is interrupted, Start/Resume indicator flashes. Cycle will not resume until door is closed and Start/Resume is pressed. NOTE: If Start/Resumebutton is located on top of door, push door firmly closed within 4 seconds of pressing START/RESUME. If door is not closed within 4 seconds, Start button LED will flash, an audible tone will be heard (on some top control models), and cycle will not start. Press to cancel wash cycle. Close door firmly. The dishwasher starts a 3-minute drain (if needed). Let dishwasher drain completely. C AB Control Lock avoids To turn on Lock, press and hold CONTROL LOCK or SANITIZE (depending on model) unintended use of for 3 seconds. Control Lock light will stay on for a short time, indicating that it is dishwasher between cycles, activated and all buttons are disabled. If you press any button while the dishwasher is or cycle and option changes locked, light flashes 3 times. Dishwasher door can still be opened/closed while during a cycle. controls are locked. To turn off Lock, press and hold CONTROL LOCK or SANITIZE (depending on model) for 3 seconds. Light turns off. NOTE: If the model requires you to press and hold Sanitize to lock controls, Control Locked LED (C) will be on or off to indicate whether Control Lock is active or not. 8