Maytag MEW9530AS Installation Guide - Page 12

Install Oven 1. Using 2 or more people, lift the oven partially into the cabinet cutout. Use the oven opening as an area to grip. NOTE: Push against seal area of the oven front frame when pushing the oven into the cabinet. Do not push against the outside edges. 4. Insert the grommet into the mounting rail hole using a flatblade screwdriver. Insert the screwdriver into the grommet and turn ¹⁄₄ turn counterclockwise. Make sure the grommet stays in position. A B C 2. Push against the seal area of the front frame to push the oven into the cabinet until the back surface of the front frame touches the front wall of the cabinet. A. Shipping foot 3. Push oven completely into the cabinet and center the oven into the cabinet cutout. NOTE: If you have model KEBK171B, KEBK101B, KEBK276B, KEBK206B, KEBS179B, KEBS109B, KEBS277B, KEBS279B, KEBS207B, KEBS209B, KEBU109B or KEBU209B, proceed to Step 5. A. Mounting rail B. Mounting rail hole C. Grommet 5. Securely fasten oven to cabinet using the # 8-14 x 1" screws provided. Insert the screws through hole in the grommet. Do not overtighten screws. 6. On models with the foot positioned with the long side of the foot facing toward the top of the oven, the oven vent is taped to the side of the oven. See the following instructions to install. ■ Align vent tab (B) with oven frame (A) as shown. ■ Using one #8-18 x ³⁄₈" screw (D) on each side of the vent tab (B), fasten the vent securely to the oven. A B D C A. Oven frame B. Vent tab C. Oven vent D. #8-18 x ³⁄₈" screws 12