Maytag MEW9530AS Installation Guide - Page 8

2. Remove the foot from the right front spacer by removing the #8-18 x ³⁄₈" screw. NOTE: Do not remove the spacer. A B C A. Spacer B. Foot C. #8-18 x ³⁄₈" screw 3. Rotate the foot 90° so the short side of the foot is positioned toward the top of the oven. Double Ovens The positioning of the oven feet allow a double oven to be installed in a cutout height between 48⁷⁄₈" (124.1 cm) and 52 132.6 cm). Refer to the following instructions to position the feet for the size of your cabinet cutout. Cutout height is between 48⁷⁄₈" (124.1 cm) and 50 128.1 cm) The oven feet do not need to be installed. The oven is configured correctly as received. NOTE: Do not remove the spacers. Go to the "Make Electrical Connection" section. 4. Reinstall the foot to the spacer using the #8-18 x ³⁄₈" screw previously removed. 5. In the same manner, remove, rotate and reinstall the feet on the right rear, left front, and left rear of the oven. 6. Using 2 or more people, place the oven in its upright position. A. Spacers A A 7. Go to the "Make Electrical Connection" section. 8