Maytag MHW5500FC Use & Care Guide - Page 17
Touch POWER/CANCEL to turn
View all Maytag MHW5500FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
7. Touch POWER/CANCEL to turn on washer 10. Select any additional options* Slowly close the Optimal Dispense drawer. Make sure the drawer is closed completely, then touch POWER/CANCEL to turn on the washer or go to Step 8. 8. Select CYCLE* To add an option to the cycle, touch its name - Fresh Hold, Steam for Stains, Extra Rinse, Cycle Signal, or Control Lock. To remove an option from the selected cycle, touch the option again. 11. Set detergent concentration and water hardness Turn cycle knob to select your wash cycle. See "Cycle Guide" for details on cycle features. 9. Adjust settings, if desired* You can adjust the detergent concentration and water hardness settings if needed. Default settings are 2x detergent concentration and normal water hardness. If the detergent concentration is not listed on the package, see "About Detergent Concentration" to calculate the concentration. To Adjust Dispenser Settings: 1. Touch - or + until the desired concentration appears on the time display. 2. Touch WATER HARDNESS until the desired water hardness appears on the time display. The display will show the default settings for the selected cycle. To adjust a setting, touch its name - Temperature, Soil Level, or Spin Speed. Adjusting settings will change the Estimated Cycle Time. Tightly packing the load, unbalanced loads, or excessive suds may also cause the washer to increase the cycle time. *Not all options and settings are available with all cycles. See "Cycle Guide" for available options and settings. 17