Maytag MHW6630MBK Owners Manual - Page 11

Drain System, Floor standpipe drain system

Get Maytag MHW6630MBK PDF manuals and user guides View all Maytag MHW6630MBK manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Recessed area or closet installation (stacked washer and dryer) Custom cabinet installation Custom under counter installation Recessed area or closet installation (washer only) Drain System It is the responsibility of the installer to install and secure the drain hose in to the provided plumbing/drain in a manner that will avoid the drain hose coming out of o leaking from the plumbing/drain. Drain system can be installed using a floor drain, wall standpipe, floor standpipe, or laundry tub. Select the method you need. IMPORTANT: To avoid siphoning, only 4.5" (114 mm) of drain hose should be inside standpipe. Always secure drain hose with cable tie. Floor standpipe drain system Minimum diameter for a standpipe drain: 2" (51 mm). Minimum carry-away capacity: 17 gallons (64 L) per minute. A 1/4" (6 mm) diameter to 1" (25 mm) diameter Standpipe Adapter Kit is available; refer to the Quick Start Guide for online ordering information. Top of standpipe must be at least 39" (762 mm) high; install no higher than 96" (2.4 m) from bottom of washer. If you have an overhead sewer and need to pump higher than 96" (2.4 m), a sump pump and associated hardware are needed. See "Alternate Parts." 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
11
Recessed area or closet installation (stacked
washer and dryer)
Custom under counter installation
Recessed area or closet installation (washer only)
Custom cabinet installation
Drain System
It is the responsibility of the installer to install and secure the drain
hose in to the provided plumbing/drain in a manner that will avoid
the drain hose coming out of o leaking from the plumbing/drain.
Drain system can be installed using a floor drain, wall standpipe,
floor standpipe, or laundry tub. Select the method you need.
IMPORTANT:
To avoid siphoning, only 4.5" (114 mm) of drain
hose should be inside standpipe. Always secure drain hose with
cable tie.
Floor standpipe drain system
Minimum diameter for a standpipe drain: 2" (51 mm). Minimum
carry-away capacity: 17 gallons (64 L) per minute. A 1/4" (6 mm)
diameter to 1" (25 mm) diameter Standpipe Adapter Kit is
available; refer to the Quick Start Guide for online ordering
information. Top of standpipe must be at least 39" (762 mm) high;
install no higher than 96" (2.4 m) from bottom of washer. If you
have an overhead sewer and need to pump higher than 96"
(2.4 m), a sump pump and associated hardware are needed. See
“Alternate Parts.”