Miele Complete C3 Cat & Dog Product Manual - Page 20

Cleaning and care, Frequently asked questions, Technical service, Optional accessories, comes on

Page 20 highlights

en Replacing the thread catchers (see fig. 42 + 43) ^ Use a screwdriver or similar object to remove the thread catchers from the slots. ^ Insert the new thread catchers. New thread catcher pads can be purchased from any authorized Miele vacuum dealer or Miele. Cleaning and care ,Turn off the vacuum and unplug it from the outlet before performing any maintenance work. Vacuum cleaner and accessories The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics. ,Do not use abrasive, oil-based, glass or all purpose cleaners! Dust compartment The dust compartment can, if necessary, be cleaned using a dry cloth, dusting brush or a second vacuum to remove any dust. Monitor the filter bag change indicator and inspect all filters regularly. Clean or replace them when necessary according to these Operating Instructions. Frequently asked questions The vacuum cleaner shuts off automatically. A warning light § comes on to indicate overheating, depending on model (see fig. 44). A temperature sensor will turn off the vacuum cleaner if it becomes too warm. This problem can occur if, for example, an object is blocking the suction hose or the filter bag pores have become clogged with fine dust. The cause could also be a heavily soiled exhaust or dust compartment filter. If this happens, turn off the vacuum cleaner (press the On/Off foot switch s) and unplug the power plug from the electrical outlet. Once the cause has been addressed, allow the vacuum cleaner to cool for approx. 20 - 30 minutes before resuming vacuuming. Technical service In the event of a fault which you cannot fix yourself please contact the Miele Service Department at the phone number listed on the back of this booklet. ^ Please quote the model type of your appliance. This can be found on the data plate on the bottom of the vacuum. Optional accessories ,Do not submerge the vacuum in water. If moisture gets into the appliance there is the risk of an electric shock. 20 Always follow the flooring manufacturer's cleaning and care instructions. You can order these and many other products via the Miele website.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Replacing the thread catchers
(see fig. 42 + 43)
^
Use a screwdriver or similar object to
remove the thread catchers from the
slots.
^
Insert the new thread catchers.
New thread catcher pads can be
purchased from any authorized Miele
vacuum dealer or Miele.
Cleaning and care
,
Turn off the vacuum and unplug
it from the outlet before performing
any maintenance work.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic
accessories can be cleaned with a damp
cloth or a cleaner suitable for plastics.
,
Do not use abrasive, oil-based,
glass or all purpose cleaners!
Dust compartment
The dust compartment can, if necessary,
be cleaned using a
dry
cloth, dusting
brush or a second vacuum to remove any
dust.
Monitor the filter bag change indicator
and inspect all filters regularly. Clean or
replace them when necessary according
to these Operating Instructions.
,
Do not submerge the vacuum in
water. If moisture gets into the
appliance there is the risk of an
electric shock.
Frequently asked questions
The vacuum cleaner shuts off
automatically.
A warning light
ยง
comes on to
indicate overheating, depending on
model (see fig. 44).
A temperature sensor will turn off the
vacuum cleaner if it becomes too warm.
This problem can occur if, for example,
an object is blocking the suction hose or
the filter bag pores have become
clogged with fine dust. The cause could
also be a heavily soiled exhaust or dust
compartment filter. If this happens, turn
off the vacuum cleaner (press the On/Off
foot switch
s
) and unplug the power
plug from the electrical outlet.
Once the cause has been addressed,
allow the vacuum cleaner to cool for
approx. 20 - 30 minutes before
resuming vacuuming.
Technical service
In the event of a fault which you cannot fix
yourself please contact the Miele Service
Department at the phone number listed
on the back of this booklet.
^
Please quote the model type of your
appliance.
This can be found on the data plate on
the bottom of the vacuum.
Optional accessories
Always follow the flooring
manufacturer's cleaning and care
instructions.
You can order these and many other
products via the Miele website.
en
20