Miele Crystal G 5225 Operating and Installation manual - Page 19
Adjusting the dosage 19, briefly three times in intervals.
View all Miele Crystal G 5225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Before using for the first time Adjusting the dosage In order to obtain an optimal cleaning result you can adjust the dosing quantity of the rinse aid. The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 0 to 6. - Use a higher setting if spots appear on dry glassware. ^ Use a lower setting if streaking appears on dishes or glasses. P 3 will flash in the display. This means that the rinse aid dosage has been set to 3 ml at the factory. The dosage set will show in the display after the P. ^ Select the desired setting with the "Start / Stop" button. Every touch of the button increases the level. The programmed dosage is saved. ^ Turn the dishwasher off "s". ^ Turn the dishwasher off "s". ^ Press the "Start / Stop" button and at the same time turn the dishwasher on s. Hold the "Start / Stop" button until the "Start / Stop" indicator comes on. If it does not come on, start over. ^ Press the "Delay Start" button three times. The "Delay Start" indicator will flash briefly three times in intervals. 19