Miele Crystal G 5225 Operating and Installation manual - Page 47

General problems with the dishwasher 47, Only the Start/Stop

Get Miele Crystal G 5225 PDF manuals and user guides View all Miele Crystal G 5225 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Frequently asked questions General problems with the dishwasher Problem Possible fault Solution The time display is dark. Only the Start/Stop indicator light flashes slowly. The dishwasher has gone Press any button to come into Standby mode to save out of Standby. energy. There are detergent The dispenser was wet residues in the when detergent was dispenser at the end of added. a program. Make sure the dispenser is dry before adding detergent. The detergent Detergent residue is dispenser flap cannot blocking the latch. be closed properly. Remove the detergent residue. The inside of the door and/or the interior walls are wet after a program has finished. This is normal! None. The moisture evaporates after some time. There is water in the wash cabinet at the end of a program. Before fixing the fault: - Press the K button to turn the dishwasher off. The triple filter in the wash Clean the triple filter (see cabinet is clogged. Cleaning and care). The drain pump or non-return valve is blocked. Clean the drain pump or the non-return valve (see User maintenance instructions). There is a kink in the drain Remove the kink. hose. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
General problems with the dishwasher
Problem
Possible fault
Solution
The time display is
dark.
Only the Start/Stop
indicator light flashes
slowly.
The dishwasher has gone
into Standby mode to save
energy.
Press any button to come
out of Standby.
There are detergent
residues in the
dispenser at the end of
a program.
The dispenser was wet
when detergent was
added.
Make sure the dispenser is
dry before adding
detergent.
The detergent
dispenser flap cannot
be closed properly.
Detergent residue is
blocking the latch.
Remove the detergent
residue.
The inside of the door
and/or the interior
walls are wet after a
program has finished.
This is normal!
None.
The moisture evaporates
after some time.
There is water in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Press the
K
button to
turn the dishwasher off.
The triple filter in the wash
cabinet is clogged.
Clean the triple filter (see
Cleaning and care).
The drain pump or
non-return valve is
blocked.
Clean the drain pump or
the non-return valve (see
User maintenance
instructions).
There is a kink in the drain
hose.
Remove the kink.
Frequently asked questions
47