Miele ESW 4824 Operating and Installation manual - Page 40
Integrated installations 40, ESW 4702 FB and ESW 4802 FB.
View all Miele ESW 4824 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installation Integrated installations Custom made front panels can be installed with models ESW 4702 FB and ESW 4802 FB. The custom panel must be at least 3/8" (19 mm) thick and made of heat resistant material 140 °F (60 °C). The front panel, including handle, must not exceed 11 lb (5 kg) in weight. ^ Install a handle to the custom front panel using countersunk screws. ^ Remove the screws from the left and right sides of the drawer front and carefully lift the control panel out of the drawer (see chapter "Aligning the appliance front"). Be careful not to pull or damage the power cord. ^ Remove the two screws on the inner side of the drawer and remove the panel from the appliance front. ^ Pre-drill the custom front panel (see illustration). C 3/8" (10 mm), t = 3/8" (10 mm) 40