Motorola 2210 User Manual - Page 12

ENGLISH FAQs Q: Why is my DSL light flashing green? A: A flashing green light indicates that no cable is attached to the DSL port or that the Motorola Modem is negotiating a connection. A solid green DSL light indicates that an internet connection is established. If your DSL light does not become solid green, verify that the connection from the Motorola Modem's DSL port to the telephone/DSL jack is secure. If the connection is secure, contact your ISP (Internet Service Provider) to verify that your DSL line is functioning properly. Q: I forgot my Admin password, how can I access my Motorola Modem? A: If you forgot your Admin password, the only way to access the Motorola Modem is to do the following: Referring to the following diagram, find the Factory Reset switch: Carefully insert the point of a pen or an unwound paperclip into the center of the switch. •If you press the factory default button for less than 1/2 a second, the unit will continue to run as Factory Reset Switch normal. •If you press the factory default button for more than 3 seconds, when you release it, the Modem will perform a factory reset, clear all settings and configurations, and reboot. Note: To assure the Motorola Modem factory defaults you MUST hold the reset switch for more than 3 seconds. When you release it, the Modem will perform a factory reset, clear all setting and configurations, and reboot. Keep in mind that all of your settings will need to be reconfigured. 12