NEC 8M-B120C 8M-B120C Quick Start Setup Guide - Page 7
Connecting an 8K Video Device/Quad-screen display 4K or less
View all NEC 8M-B120C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
POLSKI ITALIANO DEUTSCH FRANÇAIS ESPAÑOL ENGLISH Connecting an 8K Video Device/Quad-screen display (4K or less) • To connect the product to an 8K output (with 7680 x 4320 resolution) compatible device, use four Premium HDMI Cables. • Connect the devices properly so that the output signal from the device can be displayed at the appropriate position. The display positions for the HDMI input terminals are shown on the below. (default) • Multi-screen display by using 8K signal is not supported. • In MODE2, 8K display is possible whenever any input signal to INPUT 7 (A to D) is synchronized. • By factory default, the Monitor uses the audio to INPUT7-A. • To change the setting, after switching to INPUT7, go to the Setup menu, select Setup > (Option) > Terminal setting > INPUT7 audio setting, and then select a terminal to input audio. • Also refer to the operating instructions of the device to be connected. • Commercially available Premium HDMI Cables are necessary. To reduce loads on the terminals and prevent breakage, thread the HDMI cables through the cable clamps to secure. qRear side of Monitor 8K output compatible device* Mode1 (4K x1) Mode2 (8K) INPUT7-A/B/C/D INPUT7-A INPUT7-C INPUT7-B INPUT7-D Mode3 (4K x4) INPUT7-A INPUT7-C INPUT7-B INPUT7-D Mode4 (4K x4) INPUT7-A INPUT7-B INPUT7-C INPUT7-D INPUT7 Premium HDMI cable (Commercial Item) * In Mode2. In Mode1/3/4, connect to each device. EN 5